diff options
Diffstat (limited to 'inventory')
| -rw-r--r-- | inventory/byo/hosts.byo.native-glusterfs.example | 51 | ||||
| -rw-r--r-- | inventory/byo/hosts.origin.example | 41 | ||||
| -rw-r--r-- | inventory/byo/hosts.ose.example | 41 |
3 files changed, 111 insertions, 22 deletions
diff --git a/inventory/byo/hosts.byo.native-glusterfs.example b/inventory/byo/hosts.byo.native-glusterfs.example new file mode 100644 index 000000000..2dbb57d40 --- /dev/null +++ b/inventory/byo/hosts.byo.native-glusterfs.example @@ -0,0 +1,51 @@ +# This is an example of a bring your own (byo) host inventory for a cluster +# with natively hosted, containerized GlusterFS storage. +# +# This inventory may be used with the byo/config.yml playbook to deploy a new +# cluster with GlusterFS storage, which will use that storage to create a +# volume that will provide backend storage for a hosted Docker registry. +# +# This inventory may also be used with byo/openshift-glusterfs/config.yml to +# deploy GlusterFS storage on an existing cluster. With this playbook, the +# registry backend volume will be created but the administrator must then +# either deploy a hosted registry or change an existing hosted registry to use +# that volume. +# +# There are additional configuration parameters that can be specified to +# control the deployment and state of a GlusterFS cluster. Please see the +# documentation in playbooks/byo/openshift-glusterfs/README.md and +# roles/openshift_storage_glusterfs/README.md for additional details. + +[OSEv3:children] +masters +nodes +# Specify there will be GlusterFS nodes +glusterfs + +[OSEv3:vars] +ansible_ssh_user=root +deployment_type=origin +# Specify that we want to use GlusterFS storage for a hosted registry +openshift_hosted_registry_storage_kind=glusterfs + +[masters] +master node=True storage=True master=True + +[nodes] +master node=True storage=True master=True openshift_schedulable=False +# A hosted registry, by default, will only be deployed on nodes labeled +# "region=infra". +node0 node=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True +node1 node=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True +node2 node=True openshift_node_labels="{'region': 'infra'}" openshift_schedulable=True + +# Specify the glusterfs group, which contains the nodes that will host +# GlusterFS storage pods. At a minimum, each node must have a +# "glusterfs_devices" variable defined. This variable is a list of block +# devices the node will have access to that is intended solely for use as +# GlusterFS storage. These block devices must be bare (e.g. have no data, not +# be marked as LVM PVs), and will be formatted. +[glusterfs] +node0 glusterfs_devices='[ "/dev/vdb", "/dev/vdc", "/dev/vdd" ]' +node1 glusterfs_devices='[ "/dev/vdb", "/dev/vdc", "/dev/vdd" ]' +node2 glusterfs_devices='[ "/dev/vdb", "/dev/vdc", "/dev/vdd" ]' diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example index 1c525e851..d52036930 100644 --- a/inventory/byo/hosts.origin.example +++ b/inventory/byo/hosts.origin.example @@ -30,17 +30,17 @@ openshift_deployment_type=origin # use this to lookup the latest exact version of the container images, which is the tag actually used to configure # the cluster. For RPM installations we just verify the version detected in your configured repos matches this # release. -openshift_release=v1.5 +openshift_release=v3.6 # Specify an exact container image tag to install or configure. # WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_image_tag=v1.5.0 +#openshift_image_tag=v3.6.0 # Specify an exact rpm version to install or configure. # WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_pkg_version=-1.5.0 +#openshift_pkg_version=-3.6.0 # Install the openshift examples #openshift_install_examples=true @@ -78,6 +78,18 @@ openshift_release=v1.5 #openshift_docker_blocked_registries=registry.hacker.com # Disable pushing to dockerhub #openshift_docker_disable_push_dockerhub=True +# Use Docker inside a System Container. Note that this is a tech preview and should +# not be used to upgrade! +# The following options for docker are ignored: +# - docker_version +# - docker_upgrade +# The following options must not be used +# - openshift_docker_options +#openshift_docker_use_system_container=False +# Force the registry to use for the system container. By default the registry +# will be built off of the deployment type and ansible_distribution. Only +# use this option if you are sure you know what you are doing! +#openshift_docker_systemcontainer_image_registry_override="registry.example.com" # Items added, as is, to end of /etc/sysconfig/docker OPTIONS # Default value: "--log-driver=journald" #openshift_docker_options="-l warn --ipv6=false" @@ -333,7 +345,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # selector: type=router1 # images: "openshift3/ose-${component}:${version}" # edits: [] -# certificates: +# certificate: # certfile: /path/to/certificate/abc.crt # keyfile: /path/to/certificate/abc.key # cafile: /path/to/certificate/ca.crt @@ -347,7 +359,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # serviceaccount: router # selector: type=router2 # images: "openshift3/ose-${component}:${version}" -# certificates: +# certificate: # certfile: /path/to/certificate/xyz.crt # keyfile: /path/to/certificate/xyz.key # cafile: /path/to/certificate/ca.crt @@ -426,9 +438,6 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 #openshift_hosted_registry_storage_volume_size=10Gi # -# Native GlusterFS Registry Storage -#openshift_hosted_registry_storage_kind=glusterfs -# # AWS S3 # S3 bucket must already exist. #openshift_hosted_registry_storage_kind=object @@ -512,6 +521,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Currently, you may only alter the hostname portion of the url, alterting the # `/hawkular/metrics` path will break installation of metrics. #openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics +# Configure the prefix and version for the component images +#openshift_hosted_metrics_deployer_prefix=docker.io/openshift/origin- +#openshift_hosted_metrics_deployer_version=3.6.0 # Logging deployment # @@ -559,7 +571,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_logging_elasticsearch_cluster_size=1 # Configure the prefix and version for the component images #openshift_hosted_logging_deployer_prefix=docker.io/openshift/origin- -#openshift_hosted_logging_deployer_version=1.5.0 +#openshift_hosted_logging_deployer_version=3.6.0 # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -571,10 +583,17 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # network blocks should be private and should not conflict with network blocks # in your infrastructure that pods may require access to. Can not be changed # after deployment. +# +# WARNING : Do not pick subnets that overlap with the default Docker bridge subnet of +# 172.17.0.0/16. Your installation will fail and/or your configuration change will +# cause the Pod SDN or Cluster SDN to fail. +# +# WORKAROUND : If you must use an overlapping subnet, you can configure a non conflicting +# docker0 CIDR range by adding '--bip=192.168.2.1/24' to DOCKER_NETWORK_OPTIONS +# environment variable located in /etc/sysconfig/docker-network. #osm_cluster_network_cidr=10.128.0.0/14 #openshift_portal_net=172.30.0.0/16 - # ExternalIPNetworkCIDRs controls what values are acceptable for the # service external IP field. If empty, no externalIP may be set. It # may contain a list of CIDRs which are checked for access. If a CIDR @@ -758,7 +777,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_node_env_vars={"ENABLE_HTTP2": "true"} # Enable API service auditing, available as of 1.3 -#openshift_master_audit_config={"basicAuditEnabled": true} +#openshift_master_audit_config={"enabled": true} # Enable origin repos that point at Centos PAAS SIG, defaults to true, only used # by deployment_type=origin diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example index 544d71fc4..647dd3d9a 100644 --- a/inventory/byo/hosts.ose.example +++ b/inventory/byo/hosts.ose.example @@ -30,17 +30,17 @@ openshift_deployment_type=openshift-enterprise # use this to lookup the latest exact version of the container images, which is the tag actually used to configure # the cluster. For RPM installations we just verify the version detected in your configured repos matches this # release. -openshift_release=v3.5 +openshift_release=v3.6 # Specify an exact container image tag to install or configure. # WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_image_tag=v3.5.0 +#openshift_image_tag=v3.6.0 # Specify an exact rpm version to install or configure. # WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. # This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_pkg_version=-3.5.0 +#openshift_pkg_version=-3.6.0 # Install the openshift examples #openshift_install_examples=true @@ -78,6 +78,18 @@ openshift_release=v3.5 #openshift_docker_blocked_registries=registry.hacker.com # Disable pushing to dockerhub #openshift_docker_disable_push_dockerhub=True +# Use Docker inside a System Container. Note that this is a tech preview and should +# not be used to upgrade! +# The following options for docker are ignored: +# - docker_version +# - docker_upgrade +# The following options must not be used +# - openshift_docker_options +#openshift_docker_use_system_container=False +# Force the registry to use for the system container. By default the registry +# will be built off of the deployment type and ansible_distribution. Only +# use this option if you are sure you know what you are doing! +#openshift_docker_systemcontainer_image_registry_override="registry.example.com" # Items added, as is, to end of /etc/sysconfig/docker OPTIONS # Default value: "--log-driver=journald" #openshift_docker_options="-l warn --ipv6=false" @@ -333,7 +345,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # selector: type=router1 # images: "openshift3/ose-${component}:${version}" # edits: [] -# certificates: +# certificate: # certfile: /path/to/certificate/abc.crt # keyfile: /path/to/certificate/abc.key # cafile: /path/to/certificate/ca.crt @@ -347,7 +359,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # serviceaccount: router # selector: type=router2 # images: "openshift3/ose-${component}:${version}" -# certificates: +# certificate: # certfile: /path/to/certificate/xyz.crt # keyfile: /path/to/certificate/xyz.key # cafile: /path/to/certificate/ca.crt @@ -426,9 +438,6 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 #openshift_hosted_registry_storage_volume_size=10Gi # -# Native GlusterFS Registry Storage -#openshift_hosted_registry_storage_kind=glusterfs -# # AWS S3 # # S3 bucket must already exist. @@ -513,6 +522,9 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # Currently, you may only alter the hostname portion of the url, alterting the # `/hawkular/metrics` path will break installation of metrics. #openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics +# Configure the prefix and version for the component images +#openshift_hosted_metrics_deployer_prefix=registry.example.com:8888/openshift3/ +#openshift_hosted_metrics_deployer_version=3.6.0 # Logging deployment # @@ -560,7 +572,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_logging_elasticsearch_cluster_size=1 # Configure the prefix and version for the component images #openshift_hosted_logging_deployer_prefix=registry.example.com:8888/openshift3/ -#openshift_hosted_logging_deployer_version=3.5.0 +#openshift_hosted_logging_deployer_version=3.6.0 # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -572,10 +584,17 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', # network blocks should be private and should not conflict with network blocks # in your infrastructure that pods may require access to. Can not be changed # after deployment. +# +# WARNING : Do not pick subnets that overlap with the default Docker bridge subnet of +# 172.17.0.0/16. Your installation will fail and/or your configuration change will +# cause the Pod SDN or Cluster SDN to fail. +# +# WORKAROUND : If you must use an overlapping subnet, you can configure a non conflicting +# docker0 CIDR range by adding '--bip=192.168.2.1/24' to DOCKER_NETWORK_OPTIONS +# environment variable located in /etc/sysconfig/docker-network. #osm_cluster_network_cidr=10.128.0.0/14 #openshift_portal_net=172.30.0.0/16 - # ExternalIPNetworkCIDRs controls what values are acceptable for the # service external IP field. If empty, no externalIP may be set. It # may contain a list of CIDRs which are checked for access. If a CIDR @@ -759,7 +778,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_node_env_vars={"ENABLE_HTTP2": "true"} # Enable API service auditing, available as of 3.2 -#openshift_master_audit_config={"basicAuditEnabled": true} +#openshift_master_audit_config={"enabled": true} # Validity of the auto-generated OpenShift certificates in days. # See also openshift_hosted_registry_cert_expire_days above. |