From 85181ea469ed5f541cbac6f73aefc134526aca8d Mon Sep 17 00:00:00 2001 From: Tomas Sedovic Date: Tue, 7 Nov 2017 14:34:03 +1100 Subject: Move the OpenStack playbooks We move them from `playbooks/provisioning/openstack` to `playbooks/openstack` to mirror `playbooks/aws`. --- playbooks/openstack/README.md | 258 +++++++ playbooks/openstack/advanced-configuration.md | 773 +++++++++++++++++++++ playbooks/openstack/ansible.cfg | 24 + playbooks/openstack/custom-actions/add-cas.yml | 13 + .../custom-actions/add-docker-registry.yml | 90 +++ .../openstack/custom-actions/add-rhn-pools.yml | 13 + .../openstack/custom-actions/add-yum-repos.yml | 12 + playbooks/openstack/galaxy-requirements.yaml | 10 + .../openshift-cluster/custom_flavor_check.yaml | 9 + .../openshift-cluster/custom_image_check.yaml | 9 + .../openshift-cluster/net_vars_check.yaml | 14 + .../openstack/openshift-cluster/post-install.yml | 57 ++ .../openshift-cluster/post-provision-openstack.yml | 118 ++++ .../openstack/openshift-cluster/pre-install.yml | 19 + .../openstack/openshift-cluster/pre_tasks.yml | 53 ++ .../prepare-and-format-cinder-volume.yaml | 67 ++ .../openstack/openshift-cluster/prerequisites.yml | 123 ++++ .../openshift-cluster/provision-openstack.yml | 35 + .../openstack/openshift-cluster/provision.yaml | 4 + playbooks/openstack/openshift-cluster/roles | 1 + .../openstack/openshift-cluster/scale-up.yaml | 75 ++ .../openstack/openshift-cluster/stack_params.yaml | 49 ++ .../sample-inventory/group_vars/OSEv3.yml | 59 ++ .../openstack/sample-inventory/group_vars/all.yml | 166 +++++ playbooks/openstack/sample-inventory/inventory.py | 88 +++ 25 files changed, 2139 insertions(+) create mode 100644 playbooks/openstack/README.md create mode 100644 playbooks/openstack/advanced-configuration.md create mode 100644 playbooks/openstack/ansible.cfg create mode 100644 playbooks/openstack/custom-actions/add-cas.yml create mode 100644 playbooks/openstack/custom-actions/add-docker-registry.yml create mode 100644 playbooks/openstack/custom-actions/add-rhn-pools.yml create mode 100644 playbooks/openstack/custom-actions/add-yum-repos.yml create mode 100644 playbooks/openstack/galaxy-requirements.yaml create mode 100644 playbooks/openstack/openshift-cluster/custom_flavor_check.yaml create mode 100644 playbooks/openstack/openshift-cluster/custom_image_check.yaml create mode 100644 playbooks/openstack/openshift-cluster/net_vars_check.yaml create mode 100644 playbooks/openstack/openshift-cluster/post-install.yml create mode 100644 playbooks/openstack/openshift-cluster/post-provision-openstack.yml create mode 100644 playbooks/openstack/openshift-cluster/pre-install.yml create mode 100644 playbooks/openstack/openshift-cluster/pre_tasks.yml create mode 100644 playbooks/openstack/openshift-cluster/prepare-and-format-cinder-volume.yaml create mode 100644 playbooks/openstack/openshift-cluster/prerequisites.yml create mode 100644 playbooks/openstack/openshift-cluster/provision-openstack.yml create mode 100644 playbooks/openstack/openshift-cluster/provision.yaml create mode 120000 playbooks/openstack/openshift-cluster/roles create mode 100644 playbooks/openstack/openshift-cluster/scale-up.yaml create mode 100644 playbooks/openstack/openshift-cluster/stack_params.yaml create mode 100644 playbooks/openstack/sample-inventory/group_vars/OSEv3.yml create mode 100644 playbooks/openstack/sample-inventory/group_vars/all.yml create mode 100755 playbooks/openstack/sample-inventory/inventory.py (limited to 'playbooks/openstack') diff --git a/playbooks/openstack/README.md b/playbooks/openstack/README.md new file mode 100644 index 000000000..a2f553f4c --- /dev/null +++ b/playbooks/openstack/README.md @@ -0,0 +1,258 @@ +# OpenStack Provisioning + +This directory contains [Ansible][ansible] playbooks and roles to create +OpenStack resources (servers, networking, volumes, security groups, +etc.). The result is an environment ready for OpenShift installation +via [openshift-ansible]. + +We provide everything necessary to be able to install OpenShift on +OpenStack (including the DNS and load balancer servers when +necessary). In addition, we work on providing integration with the +OpenStack-native services (storage, lbaas, baremetal as a service, +dns, etc.). + + +## OpenStack Requirements + +Before you start the installation, you need to have an OpenStack +environment to connect to. You can use a public cloud or an OpenStack +within your organisation. It is also possible to +use [Devstack][devstack] or [TripleO][tripleo]. In the case of +TripleO, we will be running on top of the **overcloud**. + +The OpenStack release must be Newton (for Red Hat OpenStack this is +version 10) or newer. It must also satisfy these requirements: + +* Heat (Orchestration) must be available +* The deployment image (CentOS 7 or RHEL 7) must be loaded +* The deployment flavor must be available to your user + - `m1.medium` / 4GB RAM + 40GB disk should be enough for testing + - look at + the [Minimum Hardware Requirements page][hardware-requirements] + for production +* The keypair for SSH must be available in openstack +* `keystonerc` file that lets you talk to the openstack services + * NOTE: only Keystone V2 is currently supported + +Optional: +* External Neutron network with a floating IP address pool + + +## Installation + +There are four main parts to the installation: + +1. [Preparing Ansible and dependencies](#1-preparing-ansible-and-dependencies) +2. [Configuring the desired OpenStack environment and OpenShift cluster](#2-configuring-the-openstack-environment-and-openshift-cluster) +3. [Creating the OpenStack resources (VMs, networking, etc.)](#3-creating-the-openstack-resources-vms-networking-etc) +4. [Installing OpenShift](#4-installing-openshift) + +This guide is going to install [OpenShift Origin][origin] +with [CentOS 7][centos7] images with minimal customisation. + +We will create the VMs for running OpenShift, in a new Neutron +network, assign Floating IP addresses and configure DNS. + +The OpenShift cluster will have a single Master node that will run +`etcd`, a single Infra node and two App nodes. + +You can look at +the [Advanced Configuration page][advanced-configuration] for +additional options. + + + +### 1. Preparing Ansible and dependencies + +First, you need to select where to run [Ansible][ansible] from (the +*Ansible host*). This can be the computer you read this guide on or an +OpenStack VM you'll create specifically for this purpose. + +We will use +a +[Docker image that has all the dependencies installed][control-host-image] to +make things easier. If you don't want to use Docker, take a look at +the [Ansible host dependencies][ansible-dependencies] and make sure +they're installed. + +Your *Ansible host* needs to have the following: + +1. Docker +2. `keystonerc` file with your OpenStack credentials +3. SSH private key for logging in to your OpenShift nodes + +Assuming your private key is `~/.ssh/id_rsa` and `keystonerc` in your +current directory: + +```bash +$ sudo docker run -it -v ~/.ssh:/mnt/.ssh:Z \ + -v $PWD/keystonerc:/root/.config/openstack/keystonerc.sh:Z \ + redhatcop/control-host-openstack bash +``` + +This will create the container, add your SSH key and source your +`keystonerc`. It should be set up for the installation. + +You can verify that everything is in order: + + +```bash +$ less .ssh/id_rsa +$ ansible --version +$ openstack image list +``` + + +### 2. Configuring the OpenStack Environment and OpenShift Cluster + +The configuration is all done in an Ansible inventory directory. We +will clone the [openshift-ansible-contrib][contrib] repository and set +things up for a minimal installation. + + +``` +$ git clone https://github.com/openshift/openshift-ansible-contrib +$ cp -r openshift-ansible-contrib/playbooks/provisioning/openstack/sample-inventory/ inventory +``` + +If you're testing multiple configurations, you can have multiple +inventories and switch between them. + +#### OpenStack Configuration + +The OpenStack configuration is in `inventory/group_vars/all.yml`. + +Open the file and plug in the image, flavor and network configuration +corresponding to your OpenStack installation. + +```bash +$ vi inventory/group_vars/all.yml +``` + +1. Set the `openstack_ssh_public_key` to your OpenStack keypair name. + - See `openstack keypair list` to find the keypairs registered with + OpenShift. + - This must correspond to your private SSH key in `~/.ssh/id_rsa` +2. Set the `openstack_external_network_name` to the floating IP + network of your openstack. + - See `openstack network list` for the list of networks. + - It's often called `public`, `external` or `ext-net`. +3. Set the `openstack_default_image_name` to the image you want your + OpenShift VMs to run. + - See `openstack image list` for the list of available images. +4. Set the `openstack_default_flavor` to the flavor you want your + OpenShift VMs to use. + - See `openstack flavor list` for the list of available flavors. + +**NOTE**: In most OpenStack environments, you will also need to +configure the forwarders for the DNS server we create. This depends on +your environment. + +Launch a VM in your OpenStack and look at its `/etc/resolv.conf` and +put the IP addresses into `public_dns_nameservers` in +`inventory/group_vars/all.yml`. + + +#### OpenShift configuration + +The OpenShift configuration is in `inventory/group_vars/OSEv3.yml`. + +The default options will mostly work, but unless you used the large +flavors for a production-ready environment, openshift-ansible's +hardware check will fail. + +Let's disable those checks by putting this in +`inventory/group_vars/OSEv3.yml`: + +```yaml +openshift_disable_check: disk_availability,memory_availability +``` + +**NOTE**: The default authentication method will allow **any username +and password** in! If you're running this in a public place, you need +to set up access control. + +Feel free to look at +the [Sample OpenShift Inventory][sample-openshift-inventory] and +the [advanced configuration][advanced-configuration]. + + +### 3. Creating the OpenStack resources (VMs, networking, etc.) + +We will install the DNS server roles using ansible galaxy and then run +the openstack provisioning playbook. The `ansible.cfg` file we provide +has useful defaults -- copy it to the directory you're going to run +Ansible from. + +```bash +$ ansible-galaxy install -r openshift-ansible-contrib/playbooks/provisioning/openstack/galaxy-requirements.yaml -p openshift-ansible-contrib/roles +$ cp openshift-ansible-contrib/playbooks/provisioning/openstack/ansible.cfg ansible.cfg +``` +(you will only need to do this once) + +Then run the provisioning playbook -- this will create the OpenStack +resources: + +```bash +$ ansible-playbook -i inventory openshift-ansible-contrib/playbooks/provisioning/openstack/provision.yaml +``` + +If you're using multiple inventories, make sure you pass the path to +the right one to `-i`. + + +### 4. Installing OpenShift + +We will use the `openshift-ansible` project to install openshift on +top of the OpenStack nodes we have prepared: + +```bash +$ git clone https://github.com/openshift/openshift-ansible +$ ansible-playbook -i inventory openshift-ansible/playbooks/byo/config.yml +``` + + +### Next Steps + +And that's it! You should have a small but functional OpenShift +cluster now. + +Take a look at [how to access the cluster][accessing-openshift] +and [how to remove it][uninstall-openshift] as well as the more +advanced configuration: + +* [Accessing the OpenShift cluster][accessing-openshift] +* [Removing the OpenShift cluster][uninstall-openshift] +* Set Up Authentication (TODO) +* [Multiple Masters with a load balancer][loadbalancer] +* [External Dns][external-dns] +* Multiple Clusters (TODO) +* [Cinder Registry][cinder-registry] +* [Bastion Node][bastion] + + +[ansible]: https://www.ansible.com/ +[openshift-ansible]: https://github.com/openshift/openshift-ansible +[devstack]: https://docs.openstack.org/devstack/ +[tripleo]: http://tripleo.org/ +[ansible-dependencies]: ./advanced-configuration.md#dependencies-for-localhost-ansible-controladmin-node +[contrib]: https://github.com/openshift/openshift-ansible-contrib +[control-host-image]: https://hub.docker.com/r/redhatcop/control-host-openstack/ +[hardware-requirements]: https://docs.openshift.org/latest/install_config/install/prerequisites.html#hardware +[origin]: https://www.openshift.org/ +[centos7]: https://www.centos.org/ +[sample-openshift-inventory]: https://github.com/openshift/openshift-ansible/blob/master/inventory/byo/hosts.example +[advanced-configuration]: ./advanced-configuration.md +[accessing-openshift]: ./advanced-configuration.md#accessing-the-openshift-cluster +[uninstall-openshift]: ./advanced-configuration.md#removing-the-openshift-cluster +[loadbalancer]: ./advanced-configuration.md#multi-master-configuration +[external-dns]: ./advanced-configuration.md#dns-configuration-variables +[cinder-registry]: ./advanced-configuration.md#creating-and-using-a-cinder-volume-for-the-openshift-registry +[bastion]: ./advanced-configuration.md#configure-static-inventory-and-access-via-a-bastion-node + + + +## License + +Like the rest of the openshift-ansible-contrib repository, the code +here is licensed under Apache 2. diff --git a/playbooks/openstack/advanced-configuration.md b/playbooks/openstack/advanced-configuration.md new file mode 100644 index 000000000..72bb95254 --- /dev/null +++ b/playbooks/openstack/advanced-configuration.md @@ -0,0 +1,773 @@ +## Dependencies for localhost (ansible control/admin node) + +* [Ansible 2.3](https://pypi.python.org/pypi/ansible) +* [Ansible-galaxy](https://pypi.python.org/pypi/ansible-galaxy-local-deps) +* [jinja2](http://jinja.pocoo.org/docs/2.9/) +* [shade](https://pypi.python.org/pypi/shade) +* python-jmespath / [jmespath](https://pypi.python.org/pypi/jmespath) +* python-dns / [dnspython](https://pypi.python.org/pypi/dnspython) +* Become (sudo) is not required. + +**NOTE**: You can use a Docker image with all dependencies set up. +Find more in the [Deployment section](#deployment). + +### Optional Dependencies for localhost +**Note**: When using rhel images, `rhel-7-server-openstack-10-rpms` repository is required in order to install these packages. + +* `python-openstackclient` +* `python-heatclient` + +## Dependencies for OpenStack hosted cluster nodes (servers) + +There are no additional dependencies for the cluster nodes. Required +configuration steps are done by Heat given a specific user data config +that normally should not be changed. + +## Required galaxy modules + +In order to pull in external dependencies for DNS configuration steps, +the following commads need to be executed: + + ansible-galaxy install \ + -r openshift-ansible-contrib/playbooks/provisioning/openstack/galaxy-requirements.yaml \ + -p openshift-ansible-contrib/roles + +Alternatively you can install directly from github: + + ansible-galaxy install git+https://github.com/redhat-cop/infra-ansible,master \ + -p openshift-ansible-contrib/roles + +Notes: +* This assumes we're in the directory that contains the clonned +openshift-ansible-contrib repo in its root path. +* When trying to install a different version, the previous one must be removed first +(`infra-ansible` directory from [roles](https://github.com/openshift/openshift-ansible-contrib/tree/master/roles)). +Otherwise, even if there are differences between the two versions, installation of the newer version is skipped. + + +## Accessing the OpenShift Cluster + +### Use the Cluster DNS + +In addition to the OpenShift nodes, we created a DNS server with all +the necessary entries. We will configure your *Ansible host* to use +this new DNS and talk to the deployed OpenShift. + +First, get the DNS IP address: + +```bash +$ openstack server show dns-0.openshift.example.com --format value --column addresses +openshift-ansible-openshift.example.com-net=192.168.99.11, 10.40.128.129 +``` + +Note the floating IP address (it's `10.40.128.129` in this case) -- if +you're not sure, try pinging them both -- it's the one that responds +to pings. + +Next, edit your `/etc/resolv.conf` as root and put `nameserver DNS_IP` as your +**first entry**. + +If your `/etc/resolv.conf` currently looks like this: + +``` +; generated by /usr/sbin/dhclient-script +search openstacklocal +nameserver 192.168.0.3 +nameserver 192.168.0.2 +``` + +Change it to this: + +``` +; generated by /usr/sbin/dhclient-script +search openstacklocal +nameserver 10.40.128.129 +nameserver 192.168.0.3 +nameserver 192.168.0.2 +``` + +### Get the `oc` Client + +**NOTE**: You can skip this section if you're using the Docker image +-- it already has the `oc` binary. + +You need to download the OpenShift command line client (called `oc`). +You can download and extract `openshift-origin-client-tools` from the +OpenShift release page: + +https://github.com/openshift/origin/releases/latest/ + +Or you can now copy it from the master node: + + $ ansible -i inventory masters[0] -m fetch -a "src=/bin/oc dest=oc" + +Either way, find the `oc` binary and put it in your `PATH`. + + +### Logging in Using the Command Line + + +``` +oc login --insecure-skip-tls-verify=true https://master-0.openshift.example.com:8443 -u user -p password +oc new-project test +oc new-app --template=cakephp-mysql-example +oc status -v +curl http://cakephp-mysql-example-test.apps.openshift.example.com +``` + +This will trigger an image build. You can run `oc logs -f +bc/cakephp-mysql-example` to follow its progress. + +Wait until the build has finished and both pods are deployed and running: + +``` +$ oc status -v +In project test on server https://master-0.openshift.example.com:8443 + +http://cakephp-mysql-example-test.apps.openshift.example.com (svc/cakephp-mysql-example) + dc/cakephp-mysql-example deploys istag/cakephp-mysql-example:latest <- + bc/cakephp-mysql-example source builds https://github.com/openshift/cakephp-ex.git on openshift/php:7.0 + deployment #1 deployed about a minute ago - 1 pod + +svc/mysql - 172.30.144.36:3306 + dc/mysql deploys openshift/mysql:5.7 + deployment #1 deployed 3 minutes ago - 1 pod + +Info: + * pod/cakephp-mysql-example-1-build has no liveness probe to verify pods are still running. + try: oc set probe pod/cakephp-mysql-example-1-build --liveness ... +View details with 'oc describe /' or list everything with 'oc get all'. + +``` + +You can now look at the deployed app using its route: + +``` +$ curl http://cakephp-mysql-example-test.apps.openshift.example.com +``` + +Its `title` should say: "Welcome to OpenShift". + + +### Accessing the UI + +You can also access the OpenShift cluster with a web browser by going to: + +https://master-0.openshift.example.com:8443 + +Note that for this to work, the OpenShift nodes must be accessible +from your computer and it's DNS configuration must use the cruster's +DNS. + + +## Removing the OpenShift Cluster + +Everything in the cluster is contained within a Heat stack. To +completely remove the cluster and all the related OpenStack resources, +run this command: + +```bash +openstack stack delete --wait --yes openshift.example.com +``` + + +## DNS configuration variables + +Pay special attention to the values in the first paragraph -- these +will depend on your OpenStack environment. + +Note that the provsisioning playbooks update the original Neutron subnet +created with the Heat stack to point to the configured DNS servers. +So the provisioned cluster nodes will start using those natively as +default nameservers. Technically, this allows to deploy OpenShift clusters +without dnsmasq proxies. + +The `env_id` and `public_dns_domain` will form the cluster's DNS domain all +your servers will be under. With the default values, this will be +`openshift.example.com`. For workloads, the default subdomain is 'apps'. +That sudomain can be set as well by the `openshift_app_domain` variable in +the inventory. + +The `openstack__hostname` is a set of variables used for customising +hostnames of servers with a given role. When such a variable stays commented, +default hostname (usually the role name) is used. + +The `public_dns_nameservers` is a list of DNS servers accessible from all +the created Nova servers. These will be serving as your DNS forwarders for +external FQDNs that do not belong to the cluster's DNS domain and its subdomains. +If you're unsure what to put in here, you can try the google or opendns servers, +but note that some organizations may be blocking them. + +The `openshift_use_dnsmasq` controls either dnsmasq is deployed or not. +By default, dnsmasq is deployed and comes as the hosts' /etc/resolv.conf file +first nameserver entry that points to the local host instance of the dnsmasq +daemon that in turn proxies DNS requests to the authoritative DNS server. +When Network Manager is enabled for provisioned cluster nodes, which is +normally the case, you should not change the defaults and always deploy dnsmasq. + +`external_nsupdate_keys` describes an external authoritative DNS server(s) +processing dynamic records updates in the public and private cluster views: + + external_nsupdate_keys: + public: + key_secret: + key_algorithm: 'hmac-md5' + key_name: 'update-key' + server: + private: + key_secret: + key_algorithm: 'hmac-sha256' + server: + +Here, for the public view section, we specified another key algorithm and +optional `key_name`, which normally defaults to the cluster's DNS domain. +This just illustrates a compatibility mode with a DNS service deployed +by OpenShift on OSP10 reference architecture, and used in a mixed mode with +another external DNS server. + +Another example defines an external DNS server for the public view +additionally to the in-stack DNS server used for the private view only: + + external_nsupdate_keys: + public: + key_secret: + key_algorithm: 'hmac-sha256' + server: + +Here, updates matching the public view will be hitting the given public +server IP. While updates matching the private view will be sent to the +auto evaluated in-stack DNS server's **public** IP. + +Note, for the in-stack DNS server, private view updates may be sent only +via the public IP of the server. You can not send updates via the private +IP yet. This forces the in-stack private server to have a floating IP. +See also the [security notes](#security-notes) + +## Flannel networking + +In order to configure the +[flannel networking](https://docs.openshift.com/container-platform/3.6/install_config/configuring_sdn.html#using-flannel), +uncomment and adjust the appropriate `inventory/group_vars/OSEv3.yml` group vars. +Note that the `osm_cluster_network_cidr` must not overlap with the default +Docker bridge subnet of 172.17.0.0/16. Or you should change the docker0 default +CIDR range otherwise. For example, by adding `--bip=192.168.2.1/24` to +`DOCKER_NETWORK_OPTIONS` located in `/etc/sysconfig/docker-network`. + +Also note that the flannel network will be provisioned on a separate isolated Neutron +subnet defined from `osm_cluster_network_cidr` and having ports security disabled. +Use the `openstack_private_data_network_name` variable to define the network +name for the heat stack resource. + +After the cluster deployment done, you should run an additional post installation +step for flannel and docker iptables configuration: + + ansible-playbook openshift-ansible-contrib/playbooks/provisioning/openstack/post-install.yml + +## Other configuration variables + +`openstack_ssh_public_key` is a Nova keypair - you can see your +keypairs with `openstack keypair list`. It must correspond to the +private SSH key Ansible will use to log into the created VMs. This is +`~/.ssh/id_rsa` by default, but you can use a different key by passing +`--private-key` to `ansible-playbook`. + +`openstack_default_image_name` is the default name of the Glance image the +servers will use. You can see your images with `openstack image list`. +In order to set a different image for a role, uncomment the line with the +corresponding variable (e.g. `openstack_lb_image_name` for load balancer) and +set its value to another available image name. `openstack_default_image_name` +must stay defined as it is used as a default value for the rest of the roles. + +`openstack_default_flavor` is the default Nova flavor the servers will use. +You can see your flavors with `openstack flavor list`. +In order to set a different flavor for a role, uncomment the line with the +corresponding variable (e.g. `openstack_lb_flavor` for load balancer) and +set its value to another available flavor. `openstack_default_flavor` must +stay defined as it is used as a default value for the rest of the roles. + +`openstack_external_network_name` is the name of the Neutron network +providing external connectivity. It is often called `public`, +`external` or `ext-net`. You can see your networks with `openstack +network list`. + +`openstack_private_network_name` is the name of the private Neutron network +providing admin/control access for ansible. It can be merged with other +cluster networks, there are no special requirements for networking. + +The `openstack_num_masters`, `openstack_num_infra` and +`openstack_num_nodes` values specify the number of Master, Infra and +App nodes to create. + +The `openshift_cluster_node_labels` defines custom labels for your openshift +cluster node groups. It currently supports app and infra node groups. +The default value of this variable sets `region: primary` to app nodes and +`region: infra` to infra nodes. +An example of setting a customised label: +``` +openshift_cluster_node_labels: + app: + mylabel: myvalue +``` + +The `openstack_nodes_to_remove` allows you to specify the numerical indexes +of App nodes that should be removed; for example, ['0', '2'], + +The `docker_volume_size` is the default Docker volume size the servers will use. +In order to set a different volume size for a role, +uncomment the line with the corresponding variable (e. g. `docker_master_volume_size` +for master) and change its value. `docker_volume_size` must stay defined as it is +used as a default value for some of the servers (master, infra, app node). +The rest of the roles (etcd, load balancer, dns) have their defaults hard-coded. + +**Note**: If the `ephemeral_volumes` is set to `true`, the `*_volume_size` variables +will be ignored and the deployment will not create any cinder volumes. + +The `openstack_flat_secgrp`, controls Neutron security groups creation for Heat +stacks. Set it to true, if you experience issues with sec group rules +quotas. It trades security for number of rules, by sharing the same set +of firewall rules for master, node, etcd and infra nodes. + +The `required_packages` variable also provides a list of the additional +prerequisite packages to be installed before to deploy an OpenShift cluster. +Those are ignored though, if the `manage_packages: False`. + +The `openstack_inventory` controls either a static inventory will be created after the +cluster nodes provisioned on OpenStack cloud. Note, the fully dynamic inventory +is yet to be supported, so the static inventory will be created anyway. + +The `openstack_inventory_path` points the directory to host the generated static inventory. +It should point to the copied example inventory directory, otherwise ti creates +a new one for you. + +## Multi-master configuration + +Please refer to the official documentation for the +[multi-master setup](https://docs.openshift.com/container-platform/3.6/install_config/install/advanced_install.html#multiple-masters) +and define the corresponding [inventory +variables](https://docs.openshift.com/container-platform/3.6/install_config/install/advanced_install.html#configuring-cluster-variables) +in `inventory/group_vars/OSEv3.yml`. For example, given a load balancer node +under the ansible group named `ext_lb`: + + openshift_master_cluster_method: native + openshift_master_cluster_hostname: "{{ groups.ext_lb.0 }}" + openshift_master_cluster_public_hostname: "{{ groups.ext_lb.0 }}" + +## Provider Network + +Normally, the playbooks create a new Neutron network and subnet and attach +floating IP addresses to each node. If you have a provider network set up, this +is all unnecessary as you can just access servers that are placed in the +provider network directly. + +To use a provider network, set its name in `openstack_provider_network_name` in +`inventory/group_vars/all.yml`. + +If you set the provider network name, the `openstack_external_network_name` and +`openstack_private_network_name` fields will be ignored. + +**NOTE**: this will not update the nodes' DNS, so running openshift-ansible +right after provisioning will fail (unless you're using an external DNS server +your provider network knows about). You must make sure your nodes are able to +resolve each other by name. + +## Security notes + +Configure required `*_ingress_cidr` variables to restrict public access +to provisioned servers from your laptop (a /32 notation should be used) +or your trusted network. The most important is the `node_ingress_cidr` +that restricts public access to the deployed DNS server and cluster +nodes' ephemeral ports range. + +Note, the command ``curl https://api.ipify.org`` helps fiding an external +IP address of your box (the ansible admin node). + +There is also the `manage_packages` variable (defaults to True) you +may want to turn off in order to speed up the provisioning tasks. This may +be the case for development environments. When turned off, the servers will +be provisioned omitting the ``yum update`` command. This brings security +implications though, and is not recommended for production deployments. + +### DNS servers security options + +Aside from `node_ingress_cidr` restricting public access to in-stack DNS +servers, there are following (bind/named specific) DNS security +options available: + + named_public_recursion: 'no' + named_private_recursion: 'yes' + +External DNS servers, which is not included in the 'dns' hosts group, +are not managed. It is up to you to configure such ones. + +## Configure the OpenShift parameters + +Finally, you need to update the DNS entry in +`inventory/group_vars/OSEv3.yml` (look at +`openshift_master_default_subdomain`). + +In addition, this is the place where you can customise your OpenShift +installation for example by specifying the authentication. + +The full list of options is available in this sample inventory: + +https://github.com/openshift/openshift-ansible/blob/master/inventory/byo/hosts.ose.example + +Note, that in order to deploy OpenShift origin, you should update the following +variables for the `inventory/group_vars/OSEv3.yml`, `all.yml`: + + deployment_type: origin + openshift_deployment_type: "{{ deployment_type }}" + + +## Setting a custom entrypoint + +In order to set a custom entrypoint, update `openshift_master_cluster_public_hostname` + + openshift_master_cluster_public_hostname: api.openshift.example.com + +Note than an empty hostname does not work, so if your domain is `openshift.example.com`, +you cannot set this value to simply `openshift.example.com`. + +## Creating and using a Cinder volume for the OpenShift registry + +You can optionally have the playbooks create a Cinder volume and set +it up as the OpenShift hosted registry. + +To do that you need specify the desired Cinder volume name and size in +Gigabytes in `inventory/group_vars/all.yml`: + + cinder_hosted_registry_name: cinder-registry + cinder_hosted_registry_size_gb: 10 + +With this, the playbooks will create the volume and set up its +filesystem. If there is an existing volume of the same name, we will +use it but keep the existing data on it. + +To use the volume for the registry, you must first configure it with +the OpenStack credentials by putting the following to `OSEv3.yml`: + + openshift_cloudprovider_openstack_username: "{{ lookup('env','OS_USERNAME') }}" + openshift_cloudprovider_openstack_password: "{{ lookup('env','OS_PASSWORD') }}" + openshift_cloudprovider_openstack_auth_url: "{{ lookup('env','OS_AUTH_URL') }}" + openshift_cloudprovider_openstack_tenant_name: "{{ lookup('env','OS_TENANT_NAME') }}" + +This will use the credentials from your shell environment. If you want +to enter them explicitly, you can. You can also use credentials +different from the provisioning ones (say for quota or access control +reasons). + +**NOTE**: If you're testing this on (DevStack)[devstack], you must +explicitly set your Keystone API version to v2 (e.g. +`OS_AUTH_URL=http://10.34.37.47/identity/v2.0`) instead of the default +value provided by `openrc`. You may also encounter the following issue +with Cinder: + +https://github.com/kubernetes/kubernetes/issues/50461 + +You can read the (OpenShift documentation on configuring +OpenStack)[openstack] for more information. + +[devstack]: https://docs.openstack.org/devstack/latest/ +[openstack]: https://docs.openshift.org/latest/install_config/configuring_openstack.html + + +Next, we need to instruct OpenShift to use the Cinder volume for it's +registry. Again in `OSEv3.yml`: + + #openshift_hosted_registry_storage_kind: openstack + #openshift_hosted_registry_storage_access_modes: ['ReadWriteOnce'] + #openshift_hosted_registry_storage_openstack_filesystem: xfs + +The filesystem value here will be used in the initial formatting of +the volume. + +If you're using the dynamic inventory, you must uncomment these two values as +well: + + #openshift_hosted_registry_storage_openstack_volumeID: "{{ lookup('os_cinder', cinder_hosted_registry_name).id }}" + #openshift_hosted_registry_storage_volume_size: "{{ cinder_hosted_registry_size_gb }}Gi" + +But note that they use the `os_cinder` lookup plugin we provide, so you must +tell Ansible where to find it either in `ansible.cfg` (the one we provide is +configured properly) or by exporting the +`ANSIBLE_LOOKUP_PLUGINS=openshift-ansible-contrib/lookup_plugins` environment +variable. + + + +## Use an existing Cinder volume for the OpenShift registry + +You can also use a pre-existing Cinder volume for the storage of your +OpenShift registry. + +To do that, you need to have a Cinder volume. You can create one by +running: + + openstack volume create --size + +The volume needs to have a file system created before you put it to +use. + +As with the automatically-created volume, you have to set up the +OpenStack credentials in `inventory/group_vars/OSEv3.yml` as well as +registry values: + + #openshift_hosted_registry_storage_kind: openstack + #openshift_hosted_registry_storage_access_modes: ['ReadWriteOnce'] + #openshift_hosted_registry_storage_openstack_filesystem: xfs + #openshift_hosted_registry_storage_openstack_volumeID: e0ba2d73-d2f9-4514-a3b2-a0ced507fa05 + #openshift_hosted_registry_storage_volume_size: 10Gi + +Note the `openshift_hosted_registry_storage_openstack_volumeID` and +`openshift_hosted_registry_storage_volume_size` values: these need to +be added in addition to the previous variables. + +The **Cinder volume ID**, **filesystem** and **volume size** variables +must correspond to the values in your volume. The volume ID must be +the **UUID** of the Cinder volume, *not its name*. + +We can do formate the volume for you if you ask for it in +`inventory/group_vars/all.yml`: + + prepare_and_format_registry_volume: true + +**NOTE:** doing so **will destroy any data that's currently on the volume**! + +You can also run the registry setup playbook directly: + + ansible-playbook -i inventory playbooks/provisioning/openstack/prepare-and-format-cinder-volume.yaml + +(the provisioning phase must be completed, first) + + + +## Configure static inventory and access via a bastion node + +Example inventory variables: + + openstack_use_bastion: true + bastion_ingress_cidr: "{{openstack_subnet_prefix}}.0/24" + openstack_private_ssh_key: ~/.ssh/id_rsa + openstack_inventory: static + openstack_inventory_path: ../../../../inventory + openstack_ssh_config_path: /tmp/ssh.config.openshift.ansible.openshift.example.com + +The `openstack_subnet_prefix` is the openstack private network for your cluster. +And the `bastion_ingress_cidr` defines accepted range for SSH connections to nodes +additionally to the `ssh_ingress_cidr`` (see the security notes above). + +The SSH config will be stored on the ansible control node by the +gitven path. Ansible uses it automatically. To access the cluster nodes with +that ssh config, use the `-F` prefix, f.e.: + + ssh -F /tmp/ssh.config.openshift.ansible.openshift.example.com master-0.openshift.example.com echo OK + +Note, relative paths will not work for the `openstack_ssh_config_path`, but it +works for the `openstack_private_ssh_key` and `openstack_inventory_path`. In this +guide, the latter points to the current directory, where you run ansible commands +from. + +To verify nodes connectivity, use the command: + + ansible -v -i inventory/hosts -m ping all + +If something is broken, double-check the inventory variables, paths and the +generated `/hosts` and `openstack_ssh_config_path` files. + +The `inventory: dynamic` can be used instead to access cluster nodes directly via +floating IPs. In this mode you can not use a bastion node and should specify +the dynamic inventory file in your ansible commands , like `-i openstack.py`. + +## Using Docker on the Ansible host + +If you don't want to worry about the dependencies, you can use the +[OpenStack Control Host image][control-host-image]. + +[control-host-image]: https://hub.docker.com/r/redhatcop/control-host-openstack/ + +It has all the dependencies installed, but you'll need to map your +code and credentials to it. Assuming your SSH keys live in `~/.ssh` +and everything else is in your current directory (i.e. `ansible.cfg`, +`keystonerc`, `inventory`, `openshift-ansible`, +`openshift-ansible-contrib`), this is how you run the deployment: + + sudo docker run -it -v ~/.ssh:/mnt/.ssh:Z \ + -v $PWD:/root/openshift:Z \ + -v $PWD/keystonerc:/root/.config/openstack/keystonerc.sh:Z \ + redhatcop/control-host-openstack bash + +(feel free to replace `$PWD` with an actual path to your inventory and +checkouts, but note that relative paths don't work) + +The first run may take a few minutes while the image is being +downloaded. After that, you'll be inside the container and you can run +the playbooks: + + cd openshift + ansible-playbook openshift-ansible-contrib/playbooks/provisioning/openstack/provision.yaml + + +### Run the playbook + +Assuming your OpenStack (Keystone) credentials are in the `keystonerc` +this is how you stat the provisioning process from your ansible control node: + + . keystonerc + ansible-playbook openshift-ansible-contrib/playbooks/provisioning/openstack/provision.yaml + +Note, here you start with an empty inventory. The static inventory will be populated +with data so you can omit providing additional arguments for future ansible commands. + +If bastion enabled, the generates SSH config must be applied for ansible. +Otherwise, it is auto included by the previous step. In order to execute it +as a separate playbook, use the following command: + + ansible-playbook openshift-ansible-contrib/playbooks/provisioning/openstack/post-provision-openstack.yml + +The first infra node then becomes a bastion node as well and proxies access +for future ansible commands. The post-provision step also configures Satellite, +if requested, and DNS server, and ensures other OpenShift requirements to be met. + + +## Running Custom Post-Provision Actions + +A custom playbook can be run like this: + +``` +ansible-playbook --private-key ~/.ssh/openshift -i inventory/ openshift-ansible-contrib/playbooks/provisioning/openstack/custom-actions/custom-playbook.yml +``` + +If you'd like to limit the run to one particular host, you can do so as follows: + +``` +ansible-playbook --private-key ~/.ssh/openshift -i inventory/ openshift-ansible-contrib/playbooks/provisioning/openstack/custom-actions/custom-playbook.yml -l app-node-0.openshift.example.com +``` + +You can also create your own custom playbook. Here are a few examples: + +### Adding additional YUM repositories + +``` +--- +- hosts: app + tasks: + + # enable EPL + - name: Add repository + yum_repository: + name: epel + description: EPEL YUM repo + baseurl: https://download.fedoraproject.org/pub/epel/$releasever/$basearch/ +``` + +This example runs against app nodes. The list of options include: + + - cluster_hosts (all hosts: app, infra, masters, dns, lb) + - OSEv3 (app, infra, masters) + - app + - dns + - masters + - infra_hosts + +### Attaching additional RHN pools + +``` +--- +- hosts: cluster_hosts + tasks: + - name: Attach additional RHN pool + become: true + command: "/usr/bin/subscription-manager attach --pool=" + register: attach_rhn_pool_result + until: attach_rhn_pool_result.rc == 0 + retries: 10 + delay: 1 +``` + +This playbook runs against all cluster nodes. In order to help prevent slow connectivity +problems, the task is retried 10 times in case of initial failure. +Note that in order for this example to work in your deployment, your servers must use the RHEL image. + +### Adding extra Docker registry URLs + +This playbook is located in the [custom-actions](https://github.com/openshift/openshift-ansible-contrib/tree/master/playbooks/provisioning/openstack/custom-actions) directory. + +It adds URLs passed as arguments to the docker configuration program. +Going into more detail, the configuration program (which is in the YAML format) is loaded into an ansible variable +([lines 27-30](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-docker-registry.yml#L27-L30)) +and in its structure, `registries` and `insecure_registries` sections are expanded with the newly added items +([lines 56-76](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-docker-registry.yml#L56-L76)). +The new content is then saved into the original file +([lines 78-82](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-docker-registry.yml#L78-L82)) +and docker is restarted. + +Example usage: +``` +ansible-playbook -i openshift-ansible-contrib/playbooks/provisioning/openstack/custom-actions/add-docker-registry.yml --extra-vars '{"registries": "reg1", "insecure_registries": ["ins_reg1","ins_reg2"]}' +``` + +### Adding extra CAs to the trust chain + +This playbook is also located in the [custom-actions](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions) directory. +It copies passed CAs to the trust chain location and updates the trust chain on each selected host. + +Example usage: +``` +ansible-playbook -i openshift-ansible-contrib/playbooks/provisioning/openstack/custom-actions/add-cas.yml --extra-vars '{"ca_files": [, ]}' +``` + +Please consider contributing your custom playbook back to openshift-ansible-contrib! + +A library of custom post-provision actions exists in `openshift-ansible-contrib/playbooks/provisioning/openstack/custom-actions`. Playbooks include: + +* [add-yum-repos.yml](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-yum-repos.yml): adds a list of custom yum repositories to every node in the cluster +* [add-rhn-pools.yml](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-rhn-pools.yml): attaches a list of additional RHN pools to every node in the cluster +* [add-docker-registry.yml](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-docker-registry.yml): adds a list of docker registries to the docker configuration on every node in the cluster +* [add-cas.yml](https://github.com/openshift/openshift-ansible-contrib/blob/master/playbooks/provisioning/openstack/custom-actions/add-rhn-pools.yml): adds a list of CAs to the trust chain on every node in the cluster + + +## Install OpenShift + +Once it succeeds, you can install openshift by running: + + ansible-playbook openshift-ansible/playbooks/byo/config.yml + +## Access UI + +OpenShift UI may be accessed via the 1st master node FQDN, port 8443. + +When using a bastion, you may want to make an SSH tunnel from your control node +to access UI on the `https://localhost:8443`, with this inventory variable: + + openshift_ui_ssh_tunnel: True + +Note, this requires sudo rights on the ansible control node and an absolute path +for the `openstack_private_ssh_key`. You should also update the control node's +`/etc/hosts`: + + 127.0.0.1 master-0.openshift.example.com + +In order to access UI, the ssh-tunnel service will be created and started on the +control node. Make sure to remove these changes and the service manually, when not +needed anymore. + +## Scale Deployment up/down + +### Scaling up + +One can scale up the number of application nodes by executing the ansible playbook +`openshift-ansible-contrib/playbooks/provisioning/openstack/scale-up.yaml`. +This process can be done even if there is currently no deployment available. +The `increment_by` variable is used to specify by how much the deployment should +be scaled up (if none exists, it serves as a target number of application nodes). +The path to `openshift-ansible` directory can be customised by the `openshift_ansible_dir` +variable. Its value must be an absolute path to `openshift-ansible` and it cannot +contain the '/' symbol at the end. + +Usage: + +``` +ansible-playbook -i openshift-ansible-contrib/playbooks/provisioning/openstack/scale-up.yaml` [-e increment_by=] [-e openshift_ansible_dir=] +``` + +Note: This playbook works only without a bastion node (`openstack_use_bastion: False`). diff --git a/playbooks/openstack/ansible.cfg b/playbooks/openstack/ansible.cfg new file mode 100644 index 000000000..a21f023ea --- /dev/null +++ b/playbooks/openstack/ansible.cfg @@ -0,0 +1,24 @@ +# config file for ansible -- http://ansible.com/ +# ============================================== +[defaults] +ansible_user = openshift +forks = 50 +# work around privilege escalation timeouts in ansible +timeout = 30 +host_key_checking = false +inventory = inventory +inventory_ignore_extensions = secrets.py, .pyc, .cfg, .crt +gathering = smart +retry_files_enabled = false +fact_caching = jsonfile +fact_caching_connection = .ansible/cached_facts +fact_caching_timeout = 900 +stdout_callback = skippy +callback_whitelist = profile_tasks +lookup_plugins = openshift-ansible-contrib/lookup_plugins + + +[ssh_connection] +ssh_args = -o ControlMaster=auto -o ControlPersist=900s -o GSSAPIAuthentication=no +control_path = /var/tmp/%%h-%%r +pipelining = True diff --git a/playbooks/openstack/custom-actions/add-cas.yml b/playbooks/openstack/custom-actions/add-cas.yml new file mode 100644 index 000000000..b2c195f91 --- /dev/null +++ b/playbooks/openstack/custom-actions/add-cas.yml @@ -0,0 +1,13 @@ +--- +- hosts: cluster_hosts + become: true + vars: + ca_files: [] + tasks: + - name: Copy CAs to the trusted CAs location + with_items: "{{ ca_files }}" + copy: + src: "{{ item }}" + dest: /etc/pki/ca-trust/source/anchors/ + - name: Update trusted CAs + shell: 'update-ca-trust enable && update-ca-trust extract' diff --git a/playbooks/openstack/custom-actions/add-docker-registry.yml b/playbooks/openstack/custom-actions/add-docker-registry.yml new file mode 100644 index 000000000..e118a71dc --- /dev/null +++ b/playbooks/openstack/custom-actions/add-docker-registry.yml @@ -0,0 +1,90 @@ +--- +- hosts: OSEv3 + become: true + vars: + registries: [] + insecure_registries: [] + + tasks: + - name: Check if docker is even installed + command: docker + + - name: Install atomic-registries package + yum: + name: atomic-registries + state: latest + + - name: Get registry configuration file + register: file_result + stat: + path: /etc/containers/registries.conf + + - name: Check if it exists + assert: + that: 'file_result.stat.exists' + msg: "Configuration file does not exist." + + - name: Load configuration file + shell: cat /etc/containers/registries.conf + register: file_content + + - name: Store file content into a variable + set_fact: + docker_conf: "{{ file_content.stdout | from_yaml }}" + + - name: Make sure that docker file content is a dictionary + when: '(docker_conf is string) and (not docker_conf)' + set_fact: + docker_conf: {} + + - name: Make sure that registries is a list + when: 'registries is string' + set_fact: + registries_list: [ "{{ registries }}" ] + + - name: Make sure that insecure_registries is a list + when: 'insecure_registries is string' + set_fact: + insecure_registries_list: [ "{{ insecure_registries }}" ] + + - name: Set default values if there are no registries defined + set_fact: + docker_conf_registries: "{{ [] if docker_conf['registries'] is not defined else docker_conf['registries'] }}" + docker_conf_insecure_registries: "{{ [] if docker_conf['insecure_registries'] is not defined else docker_conf['insecure_registries'] }}" + + - name: Add other registries + when: 'registries_list is not defined' + register: registries_merge_result + set_fact: + docker_conf: "{{ docker_conf | combine({'registries': (docker_conf_registries + registries) | unique}, recursive=True) }}" + + - name: Add other registries (if registries had to be converted) + when: 'registries_merge_result|skipped' + set_fact: + docker_conf: "{{ docker_conf | combine({'registries': (docker_conf_registries + registries_list) | unique}, recursive=True) }}" + + - name: Add insecure registries + when: 'insecure_registries_list is not defined' + register: insecure_registries_merge_result + set_fact: + docker_conf: "{{ docker_conf | combine({'insecure_registries': (docker_conf_insecure_registries + insecure_registries) | unique }, recursive=True) }}" + + - name: Add insecure registries (if insecure_registries had to be converted) + when: 'insecure_registries_merge_result|skipped' + set_fact: + docker_conf: "{{ docker_conf | combine({'insecure_registries': (docker_conf_insecure_registries + insecure_registries_list) | unique }, recursive=True) }}" + + - name: Load variable back to file + copy: + content: "{{ docker_conf | to_yaml }}" + dest: /etc/containers/registries.conf + + - name: Restart registries service + service: + name: registries + state: restarted + + - name: Restart docker + service: + name: docker + state: restarted diff --git a/playbooks/openstack/custom-actions/add-rhn-pools.yml b/playbooks/openstack/custom-actions/add-rhn-pools.yml new file mode 100644 index 000000000..d17c1e335 --- /dev/null +++ b/playbooks/openstack/custom-actions/add-rhn-pools.yml @@ -0,0 +1,13 @@ +--- +- hosts: cluster_hosts + vars: + rhn_pools: [] + tasks: + - name: Attach additional RHN pools + become: true + with_items: "{{ rhn_pools }}" + command: "/usr/bin/subscription-manager attach --pool={{ item }}" + register: attach_rhn_pools_result + until: attach_rhn_pools_result.rc == 0 + retries: 10 + delay: 1 diff --git a/playbooks/openstack/custom-actions/add-yum-repos.yml b/playbooks/openstack/custom-actions/add-yum-repos.yml new file mode 100644 index 000000000..ffebcb642 --- /dev/null +++ b/playbooks/openstack/custom-actions/add-yum-repos.yml @@ -0,0 +1,12 @@ +--- +- hosts: cluster_hosts + vars: + yum_repos: [] + tasks: + # enable additional yum repos + - name: Add repository + yum_repository: + name: "{{ item.name }}" + description: "{{ item.description }}" + baseurl: "{{ item.baseurl }}" + with_items: "{{ yum_repos }}" diff --git a/playbooks/openstack/galaxy-requirements.yaml b/playbooks/openstack/galaxy-requirements.yaml new file mode 100644 index 000000000..1d745dcc3 --- /dev/null +++ b/playbooks/openstack/galaxy-requirements.yaml @@ -0,0 +1,10 @@ +--- +# This is the Ansible Galaxy requirements file to pull in the correct roles + +# From 'infra-ansible' +- src: https://github.com/redhat-cop/infra-ansible + version: master + +# From 'openshift-ansible' +- src: https://github.com/openshift/openshift-ansible + version: master diff --git a/playbooks/openstack/openshift-cluster/custom_flavor_check.yaml b/playbooks/openstack/openshift-cluster/custom_flavor_check.yaml new file mode 100644 index 000000000..e11874c28 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/custom_flavor_check.yaml @@ -0,0 +1,9 @@ +--- +- name: Try to get flavor facts + os_flavor_facts: + name: "{{ flavor }}" + register: flavor_result +- name: Check that custom flavor is available + assert: + that: "flavor_result.ansible_facts.openstack_flavors" + msg: "Flavor {{ flavor }} is not available." diff --git a/playbooks/openstack/openshift-cluster/custom_image_check.yaml b/playbooks/openstack/openshift-cluster/custom_image_check.yaml new file mode 100644 index 000000000..452e1e4d8 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/custom_image_check.yaml @@ -0,0 +1,9 @@ +--- +- name: Try to get image facts + os_image_facts: + image: "{{ image }}" + register: image_result +- name: Check that custom image is available + assert: + that: "image_result.ansible_facts.openstack_image" + msg: "Image {{ image }} is not available." diff --git a/playbooks/openstack/openshift-cluster/net_vars_check.yaml b/playbooks/openstack/openshift-cluster/net_vars_check.yaml new file mode 100644 index 000000000..68afde415 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/net_vars_check.yaml @@ -0,0 +1,14 @@ +--- +- name: Check the provider network configuration + fail: + msg: "Flannel SDN requires a dedicated containers data network and can not work over a provider network" + when: + - openstack_provider_network_name is defined + - openstack_private_data_network_name is defined + +- name: Check the flannel network configuration + fail: + msg: "A dedicated containers data network is only supported with Flannel SDN" + when: + - openstack_private_data_network_name is defined + - not openshift_use_flannel|default(False)|bool diff --git a/playbooks/openstack/openshift-cluster/post-install.yml b/playbooks/openstack/openshift-cluster/post-install.yml new file mode 100644 index 000000000..417813e2a --- /dev/null +++ b/playbooks/openstack/openshift-cluster/post-install.yml @@ -0,0 +1,57 @@ +--- +- hosts: OSEv3 + gather_facts: False + become: True + tasks: + - name: Save iptables rules to a backup file + when: openshift_use_flannel|default(False)|bool + shell: iptables-save > /etc/sysconfig/iptables.orig-$(date +%Y%m%d%H%M%S) + +# Enable iptables service on app nodes to persist custom rules (flannel SDN) +# FIXME(bogdando) w/a https://bugzilla.redhat.com/show_bug.cgi?id=1490820 +- hosts: app + gather_facts: False + become: True + vars: + os_firewall_allow: + - service: dnsmasq tcp + port: 53/tcp + - service: dnsmasq udp + port: 53/udp + tasks: + - when: openshift_use_flannel|default(False)|bool + block: + - include_role: + name: openshift-ansible/roles/os_firewall + - include_role: + name: openshift-ansible/roles/lib_os_firewall + - name: set allow rules for dnsmasq + os_firewall_manage_iptables: + name: "{{ item.service }}" + action: add + protocol: "{{ item.port.split('/')[1] }}" + port: "{{ item.port.split('/')[0] }}" + with_items: "{{ os_firewall_allow }}" + +- hosts: OSEv3 + gather_facts: False + become: True + tasks: + - name: Apply post-install iptables hacks for Flannel SDN (the best effort) + when: openshift_use_flannel|default(False)|bool + block: + - name: set allow/masquerade rules for for flannel/docker + shell: >- + (iptables-save | grep -q custom-flannel-docker-1) || + iptables -A DOCKER -w + -p all -j ACCEPT + -m comment --comment "custom-flannel-docker-1"; + (iptables-save | grep -q custom-flannel-docker-2) || + iptables -t nat -A POSTROUTING -w + -o {{flannel_interface|default('eth1')}} + -m comment --comment "custom-flannel-docker-2" + -j MASQUERADE + + # NOTE(bogdando) the rules will not be restored, when iptables service unit is disabled & masked + - name: Persist in-memory iptables rules (w/o dynamic KUBE rules) + shell: iptables-save | grep -v KUBE > /etc/sysconfig/iptables diff --git a/playbooks/openstack/openshift-cluster/post-provision-openstack.yml b/playbooks/openstack/openshift-cluster/post-provision-openstack.yml new file mode 100644 index 000000000..e460fbf12 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/post-provision-openstack.yml @@ -0,0 +1,118 @@ +--- +- hosts: cluster_hosts + name: Wait for the the nodes to come up + become: False + gather_facts: False + tasks: + - when: not openstack_use_bastion|default(False)|bool + wait_for_connection: + - when: openstack_use_bastion|default(False)|bool + delegate_to: bastion + wait_for_connection: + +- hosts: cluster_hosts + gather_facts: True + tasks: + - name: Debug hostvar + debug: + msg: "{{ hostvars[inventory_hostname] }}" + verbosity: 2 + +- name: OpenShift Pre-Requisites (part 1) + include: pre-install.yml + +- name: Assign hostnames + hosts: cluster_hosts + gather_facts: False + become: true + roles: + - role: hostnames + +- name: Subscribe DNS Host to allow for configuration below + hosts: dns + gather_facts: False + become: true + roles: + - role: subscription-manager + when: hostvars.localhost.rhsm_register|default(False) + tags: 'subscription-manager' + +- name: Determine which DNS server(s) to use for our generated records + hosts: localhost + gather_facts: False + become: False + roles: + - dns-server-detect + +- name: Build the DNS Server Views and Configure DNS Server(s) + hosts: dns + gather_facts: False + become: true + roles: + - role: dns-views + - role: infra-ansible/roles/dns-server + +- name: Build and process DNS Records + hosts: localhost + gather_facts: True + become: False + roles: + - role: dns-records + use_bastion: "{{ openstack_use_bastion|default(False)|bool }}" + - role: infra-ansible/roles/dns + +- name: Switch the stack subnet to the configured private DNS server + hosts: localhost + gather_facts: False + become: False + vars_files: + - stack_params.yaml + tasks: + - include_role: + name: openstack-stack + tasks_from: subnet_update_dns_servers + +- name: OpenShift Pre-Requisites (part 2) + hosts: OSEv3 + gather_facts: true + become: true + vars: + interface: "{{ flannel_interface|default('eth1') }}" + interface_file: /etc/sysconfig/network-scripts/ifcfg-{{ interface }} + interface_config: + DEVICE: "{{ interface }}" + TYPE: Ethernet + BOOTPROTO: dhcp + ONBOOT: 'yes' + DEFTROUTE: 'no' + PEERDNS: 'no' + pre_tasks: + - name: "Include DNS configuration to ensure proper name resolution" + lineinfile: + state: present + dest: /etc/sysconfig/network + regexp: "IP4_NAMESERVERS={{ hostvars['localhost'].private_dns_server }}" + line: "IP4_NAMESERVERS={{ hostvars['localhost'].private_dns_server }}" + - name: "Configure the flannel interface options" + when: openshift_use_flannel|default(False)|bool + block: + - file: + dest: "{{ interface_file }}" + state: touch + mode: 0644 + owner: root + group: root + - lineinfile: + state: present + dest: "{{ interface_file }}" + regexp: "{{ item.key }}=" + line: "{{ item.key }}={{ item.value }}" + with_dict: "{{ interface_config }}" + roles: + - node-network-manager + +- include: prepare-and-format-cinder-volume.yaml + when: > + prepare_and_format_registry_volume|default(False) or + (cinder_registry_volume is defined and + cinder_registry_volume.changed|default(False)) diff --git a/playbooks/openstack/openshift-cluster/pre-install.yml b/playbooks/openstack/openshift-cluster/pre-install.yml new file mode 100644 index 000000000..45e9005cc --- /dev/null +++ b/playbooks/openstack/openshift-cluster/pre-install.yml @@ -0,0 +1,19 @@ +--- +############################### +# OpenShift Pre-Requisites + +# - subscribe hosts +# - prepare docker +# - other prep (install additional packages, etc.) +# +- hosts: OSEv3 + become: true + roles: + - { role: subscription-manager, when: hostvars.localhost.rhsm_register|default(False), tags: 'subscription-manager', ansible_sudo: true } + - { role: docker, tags: 'docker' } + - { role: openshift-prep, tags: 'openshift-prep' } + +- hosts: localhost:cluster_hosts + become: False + tasks: + - include: pre_tasks.yml diff --git a/playbooks/openstack/openshift-cluster/pre_tasks.yml b/playbooks/openstack/openshift-cluster/pre_tasks.yml new file mode 100644 index 000000000..11fe2dd84 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/pre_tasks.yml @@ -0,0 +1,53 @@ +--- +- name: Generate Environment ID + set_fact: + env_random_id: "{{ ansible_date_time.epoch }}" + run_once: true + delegate_to: localhost + +- name: Set default Environment ID + set_fact: + default_env_id: "openshift-{{ lookup('env','OS_USERNAME') }}-{{ env_random_id }}" + delegate_to: localhost + +- name: Setting Common Facts + set_fact: + env_id: "{{ env_id | default(default_env_id) }}" + delegate_to: localhost + +- name: Updating DNS domain to include env_id (if not empty) + set_fact: + full_dns_domain: "{{ (env_id|trim == '') | ternary(public_dns_domain, env_id + '.' + public_dns_domain) }}" + delegate_to: localhost + +- name: Set the APP domain for OpenShift use + set_fact: + openshift_app_domain: "{{ openshift_app_domain | default('apps') }}" + delegate_to: localhost + +- name: Set the default app domain for routing purposes + set_fact: + openshift_master_default_subdomain: "{{ openshift_app_domain }}.{{ full_dns_domain }}" + delegate_to: localhost + when: + - openshift_master_default_subdomain is undefined + +# Check that openshift_cluster_node_labels has regions defined for all groups +# NOTE(kpilatov): if node labels are to be enabled for more groups, +# this check needs to be modified as well +- name: Set openshift_cluster_node_labels if undefined (should not happen) + set_fact: + openshift_cluster_node_labels: {'app': {'region': 'primary'}, 'infra': {'region': 'infra'}} + when: openshift_cluster_node_labels is not defined + +- name: Set openshift_cluster_node_labels for the infra group + set_fact: + openshift_cluster_node_labels: "{{ openshift_cluster_node_labels | combine({'infra': {'region': 'infra'}}, recursive=True) }}" + +- name: Set openshift_cluster_node_labels for the app group + set_fact: + openshift_cluster_node_labels: "{{ openshift_cluster_node_labels | combine({'app': {'region': 'primary'}}, recursive=True) }}" + +- name: Set openshift_cluster_node_labels for auto-scaling app nodes + set_fact: + openshift_cluster_node_labels: "{{ openshift_cluster_node_labels | combine({'app': {'autoscaling': 'app'}}, recursive=True) }}" diff --git a/playbooks/openstack/openshift-cluster/prepare-and-format-cinder-volume.yaml b/playbooks/openstack/openshift-cluster/prepare-and-format-cinder-volume.yaml new file mode 100644 index 000000000..30e094459 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/prepare-and-format-cinder-volume.yaml @@ -0,0 +1,67 @@ +--- +- hosts: localhost + gather_facts: False + become: False + tasks: + - set_fact: + cinder_volume: "{{ hostvars[groups.masters[0]].openshift_hosted_registry_storage_openstack_volumeID }}" + cinder_fs: "{{ hostvars[groups.masters[0]].openshift_hosted_registry_storage_openstack_filesystem }}" + + - name: Attach the volume to the VM + os_server_volume: + state: present + server: "{{ groups['masters'][0] }}" + volume: "{{ cinder_volume }}" + register: volume_attachment + + - set_fact: + attached_device: >- + {{ volume_attachment['attachments']|json_query("[?volume_id=='" + cinder_volume + "'].device | [0]") }} + + - delegate_to: "{{ groups['masters'][0] }}" + block: + - name: Wait for the device to appear + wait_for: path={{ attached_device }} + + - name: Create a temp directory for mounting the volume + tempfile: + prefix: cinder-volume + state: directory + register: cinder_mount_dir + + - name: Format the device + filesystem: + fstype: "{{ cinder_fs }}" + dev: "{{ attached_device }}" + + - name: Mount the device + mount: + name: "{{ cinder_mount_dir.path }}" + src: "{{ attached_device }}" + state: mounted + fstype: "{{ cinder_fs }}" + + - name: Change mode on the filesystem + file: + path: "{{ cinder_mount_dir.path }}" + state: directory + recurse: true + mode: 0777 + + - name: Unmount the device + mount: + name: "{{ cinder_mount_dir.path }}" + src: "{{ attached_device }}" + state: absent + fstype: "{{ cinder_fs }}" + + - name: Delete the temp directory + file: + name: "{{ cinder_mount_dir.path }}" + state: absent + + - name: Detach the volume from the VM + os_server_volume: + state: absent + server: "{{ groups['masters'][0] }}" + volume: "{{ cinder_volume }}" diff --git a/playbooks/openstack/openshift-cluster/prerequisites.yml b/playbooks/openstack/openshift-cluster/prerequisites.yml new file mode 100644 index 000000000..11a31411e --- /dev/null +++ b/playbooks/openstack/openshift-cluster/prerequisites.yml @@ -0,0 +1,123 @@ +--- +- hosts: localhost + tasks: + + # Sanity check of inventory variables + - include: net_vars_check.yaml + + # Check ansible + - name: Check Ansible version + assert: + that: > + (ansible_version.major == 2 and ansible_version.minor >= 3) or + (ansible_version.major > 2) + msg: "Ansible version must be at least 2.3" + + # Check shade + - name: Try to import python module shade + command: python -c "import shade" + ignore_errors: yes + register: shade_result + - name: Check if shade is installed + assert: + that: 'shade_result.rc == 0' + msg: "Python module shade is not installed" + + # Check jmespath + - name: Try to import python module shade + command: python -c "import jmespath" + ignore_errors: yes + register: jmespath_result + - name: Check if jmespath is installed + assert: + that: 'jmespath_result.rc == 0' + msg: "Python module jmespath is not installed" + + # Check python-dns + - name: Try to import python DNS module + command: python -c "import dns" + ignore_errors: yes + register: pythondns_result + - name: Check if python-dns is installed + assert: + that: 'pythondns_result.rc == 0' + msg: "Python module python-dns is not installed" + + # Check jinja2 + - name: Try to import jinja2 module + command: python -c "import jinja2" + ignore_errors: yes + register: jinja_result + - name: Check if jinja2 is installed + assert: + that: 'jinja_result.rc == 0' + msg: "Python module jinja2 is not installed" + + # Check Glance image + - name: Try to get image facts + os_image_facts: + image: "{{ openstack_default_image_name }}" + register: image_result + - name: Check that image is available + assert: + that: "image_result.ansible_facts.openstack_image" + msg: "Image {{ openstack_default_image_name }} is not available" + + # Check network name + - name: Try to get network facts + os_networks_facts: + name: "{{ openstack_external_network_name }}" + register: network_result + when: not openstack_provider_network_name|default(None) + - name: Check that network is available + assert: + that: "network_result.ansible_facts.openstack_networks" + msg: "Network {{ openstack_external_network_name }} is not available" + when: not openstack_provider_network_name|default(None) + + # Check keypair + # TODO kpilatov: there is no Ansible module for getting OS keypairs + # (os_keypair is not suitable for this) + # this method does not force python-openstackclient dependency + - name: Try to show keypair + command: > + python -c 'import shade; cloud = shade.openstack_cloud(); + exit(cloud.get_keypair("{{ openstack_ssh_public_key }}") is None)' + ignore_errors: yes + register: key_result + - name: Check that keypair is available + assert: + that: 'key_result.rc == 0' + msg: "Keypair {{ openstack_ssh_public_key }} is not available" + +# Check that custom images and flavors exist +- hosts: localhost + + # Include variables that will be used by heat + vars_files: + - stack_params.yaml + + tasks: + # Check that custom images are available + - include: custom_image_check.yaml + with_items: + - "{{ openstack_master_image }}" + - "{{ openstack_infra_image }}" + - "{{ openstack_node_image }}" + - "{{ openstack_lb_image }}" + - "{{ openstack_etcd_image }}" + - "{{ openstack_dns_image }}" + loop_control: + loop_var: image + + # Check that custom flavors are available + - include: custom_flavor_check.yaml + with_items: + - "{{ master_flavor }}" + - "{{ infra_flavor }}" + - "{{ node_flavor }}" + - "{{ lb_flavor }}" + - "{{ etcd_flavor }}" + - "{{ dns_flavor }}" + loop_control: + loop_var: flavor diff --git a/playbooks/openstack/openshift-cluster/provision-openstack.yml b/playbooks/openstack/openshift-cluster/provision-openstack.yml new file mode 100644 index 000000000..bf424676d --- /dev/null +++ b/playbooks/openstack/openshift-cluster/provision-openstack.yml @@ -0,0 +1,35 @@ +--- +- hosts: localhost + gather_facts: True + become: False + vars_files: + - stack_params.yaml + pre_tasks: + - include: pre_tasks.yml + roles: + - role: openstack-stack + - role: openstack-create-cinder-registry + when: + - cinder_hosted_registry_name is defined + - cinder_hosted_registry_size_gb is defined + - role: static_inventory + when: openstack_inventory|default('static') == 'static' + inventory_path: "{{ openstack_inventory_path|default(inventory_dir) }}" + private_ssh_key: "{{ openstack_private_ssh_key|default('') }}" + ssh_config_path: "{{ openstack_ssh_config_path|default('/tmp/ssh.config.openshift.ansible' + '.' + stack_name) }}" + ssh_user: "{{ ansible_user }}" + +- name: Refresh Server inventory or exit to apply SSH config + hosts: localhost + connection: local + become: False + gather_facts: False + tasks: + - name: Exit to apply SSH config for a bastion + meta: end_play + when: openstack_use_bastion|default(False)|bool + - name: Refresh Server inventory + meta: refresh_inventory + +- include: post-provision-openstack.yml + when: not openstack_use_bastion|default(False)|bool diff --git a/playbooks/openstack/openshift-cluster/provision.yaml b/playbooks/openstack/openshift-cluster/provision.yaml new file mode 100644 index 000000000..474c9c803 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/provision.yaml @@ -0,0 +1,4 @@ +--- +- include: "prerequisites.yml" + +- include: "provision-openstack.yml" diff --git a/playbooks/openstack/openshift-cluster/roles b/playbooks/openstack/openshift-cluster/roles new file mode 120000 index 000000000..e2b799b9d --- /dev/null +++ b/playbooks/openstack/openshift-cluster/roles @@ -0,0 +1 @@ +../../../roles/ \ No newline at end of file diff --git a/playbooks/openstack/openshift-cluster/scale-up.yaml b/playbooks/openstack/openshift-cluster/scale-up.yaml new file mode 100644 index 000000000..79fc09050 --- /dev/null +++ b/playbooks/openstack/openshift-cluster/scale-up.yaml @@ -0,0 +1,75 @@ +--- +# Get the needed information about the current deployment +- hosts: masters[0] + tasks: + - name: Get number of app nodes + shell: oc get nodes -l autoscaling=app --no-headers=true | wc -l + register: oc_old_num_nodes + - name: Get names of app nodes + shell: oc get nodes -l autoscaling=app --no-headers=true | cut -f1 -d " " + register: oc_old_app_nodes + +- hosts: localhost + tasks: + # Since both number and names of app nodes are to be removed + # localhost variables for these values need to be set + - name: Store old number and names of app nodes locally (if there is an existing deployment) + when: '"masters" in groups' + register: set_fact_result + set_fact: + oc_old_num_nodes: "{{ hostvars[groups['masters'][0]]['oc_old_num_nodes'].stdout }}" + oc_old_app_nodes: "{{ hostvars[groups['masters'][0]]['oc_old_app_nodes'].stdout_lines }}" + + - name: Set default values for old app nodes (if there is no existing deployment) + when: 'set_fact_result | skipped' + set_fact: + oc_old_num_nodes: 0 + oc_old_app_nodes: [] + + # Set how many nodes are to be added (1 by default) + - name: Set how many nodes are to be added + set_fact: + increment_by: 1 + - name: Check that the number corresponds to scaling up (not down) + assert: + that: 'increment_by | int >= 1' + msg: > + FAIL: The value of increment_by must be at least 1 + (but it is {{ increment_by | int }}). + - name: Update openstack_num_nodes variable + set_fact: + openstack_num_nodes: "{{ oc_old_num_nodes | int + increment_by | int }}" + +# Run provision.yaml with higher number of nodes to create a new app-node VM +- include: provision.yaml + +# Run config.yml to perform openshift installation +# Path to openshift-ansible can be customised: +# - the value of openshift_ansible_dir has to be an absolute path +# - the path cannot contain the '/' symbol at the end + +# Creating a new deployment by the full installation +- include: "{{ openshift_ansible_dir }}/playbooks/byo/config.yml" + vars: + openshift_ansible_dir: ../../../../openshift-ansible + when: 'not groups["new_nodes"] | list' + +# Scaling up existing deployment +- include: "{{ openshift_ansible_dir }}/playbooks/byo/openshift-node/scaleup.yml" + vars: + openshift_ansible_dir: ../../../../openshift-ansible + when: 'groups["new_nodes"] | list' + +# Post-verification: Verify new number of nodes +- hosts: masters[0] + tasks: + - name: Get number of nodes + shell: oc get nodes -l autoscaling=app --no-headers=true | wc -l + register: oc_new_num_nodes + - name: Check that the actual result matches the defined value + assert: + that: 'oc_new_num_nodes.stdout | int == (hostvars["localhost"]["oc_old_num_nodes"] | int + hostvars["localhost"]["increment_by"] | int)' + msg: > + FAIL: Number of application nodes has not been increased accordingly + (it should be {{ hostvars["localhost"]["oc_old_num_nodes"] | int + hostvars["localhost"]["increment_by"] | int }} + but it is {{ oc_new_num_nodes.stdout | int }}). diff --git a/playbooks/openstack/openshift-cluster/stack_params.yaml b/playbooks/openstack/openshift-cluster/stack_params.yaml new file mode 100644 index 000000000..a4da31bfe --- /dev/null +++ b/playbooks/openstack/openshift-cluster/stack_params.yaml @@ -0,0 +1,49 @@ +--- +stack_name: "{{ env_id }}.{{ public_dns_domain }}" +dns_domain: "{{ public_dns_domain }}" +dns_nameservers: "{{ public_dns_nameservers }}" +subnet_prefix: "{{ openstack_subnet_prefix }}" +master_hostname: "{{ openstack_master_hostname | default('master') }}" +infra_hostname: "{{ openstack_infra_hostname | default('infra-node') }}" +node_hostname: "{{ openstack_node_hostname | default('app-node') }}" +lb_hostname: "{{ openstack_lb_hostname | default('lb') }}" +etcd_hostname: "{{ openstack_etcd_hostname | default('etcd') }}" +dns_hostname: "{{ openstack_dns_hostname | default('dns') }}" +ssh_public_key: "{{ openstack_ssh_public_key }}" +openstack_image: "{{ openstack_default_image_name }}" +lb_flavor: "{{ openstack_lb_flavor | default(openstack_default_flavor) }}" +etcd_flavor: "{{ openstack_etcd_flavor | default(openstack_default_flavor) }}" +master_flavor: "{{ openstack_master_flavor | default(openstack_default_flavor) }}" +node_flavor: "{{ openstack_node_flavor | default(openstack_default_flavor) }}" +infra_flavor: "{{ openstack_infra_flavor | default(openstack_default_flavor) }}" +dns_flavor: "{{ openstack_dns_flavor | default(openstack_default_flavor) }}" +openstack_master_image: "{{ openstack_master_image_name | default(openstack_default_image_name) }}" +openstack_infra_image: "{{ openstack_infra_image_name | default(openstack_default_image_name) }}" +openstack_node_image: "{{ openstack_node_image_name | default(openstack_default_image_name) }}" +openstack_lb_image: "{{ openstack_lb_image_name | default(openstack_default_image_name) }}" +openstack_etcd_image: "{{ openstack_etcd_image_name | default(openstack_default_image_name) }}" +openstack_dns_image: "{{ openstack_dns_image_name | default(openstack_default_image_name) }}" +openstack_private_network: >- + {% if openstack_provider_network_name | default(None) -%} + {{ openstack_provider_network_name }} + {%- else -%} + {{ openstack_private_network_name | default ('openshift-ansible-' + stack_name + '-net') }} + {%- endif -%} +provider_network: "{{ openstack_provider_network_name | default(None) }}" +external_network: "{{ openstack_external_network_name | default(None) }}" +num_etcd: "{{ openstack_num_etcd | default(0) }}" +num_masters: "{{ openstack_num_masters }}" +num_nodes: "{{ openstack_num_nodes }}" +num_infra: "{{ openstack_num_infra }}" +num_dns: "{{ openstack_num_dns | default(1) }}" +master_server_group_policies: "{{ openstack_master_server_group_policies | default([]) | to_yaml }}" +infra_server_group_policies: "{{ openstack_infra_server_group_policies | default([]) | to_yaml }}" +master_volume_size: "{{ docker_master_volume_size | default(docker_volume_size) }}" +infra_volume_size: "{{ docker_infra_volume_size | default(docker_volume_size) }}" +node_volume_size: "{{ docker_node_volume_size | default(docker_volume_size) }}" +etcd_volume_size: "{{ docker_etcd_volume_size | default('2') }}" +dns_volume_size: "{{ docker_dns_volume_size | default('1') }}" +lb_volume_size: "{{ docker_lb_volume_size | default('5') }}" +nodes_to_remove: "{{ openstack_nodes_to_remove | default([]) | to_yaml }}" +use_bastion: "{{ openstack_use_bastion|default(False) }}" +ui_ssh_tunnel: "{{ openshift_ui_ssh_tunnel|default(False) }}" diff --git a/playbooks/openstack/sample-inventory/group_vars/OSEv3.yml b/playbooks/openstack/sample-inventory/group_vars/OSEv3.yml new file mode 100644 index 000000000..949a323a7 --- /dev/null +++ b/playbooks/openstack/sample-inventory/group_vars/OSEv3.yml @@ -0,0 +1,59 @@ +--- +openshift_deployment_type: origin +#openshift_deployment_type: openshift-enterprise +#openshift_release: v3.5 +openshift_master_default_subdomain: "apps.{{ env_id }}.{{ public_dns_domain }}" + +openshift_master_cluster_method: native +openshift_master_cluster_hostname: "{{ groups.lb.0|default(groups.masters.0) }}" +openshift_master_cluster_public_hostname: "{{ groups.lb.0|default(groups.masters.0) }}" + +osm_default_node_selector: 'region=primary' + +openshift_hosted_router_wait: True +openshift_hosted_registry_wait: True + +## Openstack credentials +#openshift_cloudprovider_kind=openstack +#openshift_cloudprovider_openstack_auth_url: "{{ lookup('env','OS_AUTH_URL') }}" +#openshift_cloudprovider_openstack_username: "{{ lookup('env','OS_USERNAME') }}" +#openshift_cloudprovider_openstack_password: "{{ lookup('env','OS_PASSWORD') }}" +#openshift_cloudprovider_openstack_tenant_name: "{{ lookup('env','OS_TENANT_NAME') }}" +#openshift_cloudprovider_openstack_region="{{ lookup('env', 'OS_REGION_NAME') }}" + + +## Use Cinder volume for Openshift registry: +#openshift_hosted_registry_storage_kind: openstack +#openshift_hosted_registry_storage_access_modes: ['ReadWriteOnce'] +#openshift_hosted_registry_storage_openstack_filesystem: xfs + +## NOTE(shadower): This won't work until the openshift-ansible issue #5657 is fixed: +## https://github.com/openshift/openshift-ansible/issues/5657 +## If you're using the `cinder_hosted_registry_name` option from +## `all.yml`, uncomment these lines: +#openshift_hosted_registry_storage_openstack_volumeID: "{{ lookup('os_cinder', cinder_hosted_registry_name).id }}" +#openshift_hosted_registry_storage_volume_size: "{{ cinder_hosted_registry_size_gb }}Gi" + +## If you're using a Cinder volume you've set up yourself, uncomment these lines: +#openshift_hosted_registry_storage_openstack_volumeID: e0ba2d73-d2f9-4514-a3b2-a0ced507fa05 +#openshift_hosted_registry_storage_volume_size: 10Gi + + +# NOTE(shadower): the hostname check seems to always fail because the +# host's floating IP address doesn't match the address received from +# inside the host. +openshift_override_hostname_check: true + +# For POCs or demo environments that are using smaller instances than +# the official recommended values for RAM and DISK, uncomment the line below. +#openshift_disable_check: disk_availability,memory_availability + +# NOTE(shadower): Always switch to root on the OSEv3 nodes. +# openshift-ansible requires an explicit `become`. +ansible_become: true + +# # Flannel networking +#osm_cluster_network_cidr: 10.128.0.0/14 +#openshift_use_openshift_sdn: false +#openshift_use_flannel: true +#flannel_interface: eth1 diff --git a/playbooks/openstack/sample-inventory/group_vars/all.yml b/playbooks/openstack/sample-inventory/group_vars/all.yml new file mode 100644 index 000000000..83289307d --- /dev/null +++ b/playbooks/openstack/sample-inventory/group_vars/all.yml @@ -0,0 +1,166 @@ +--- +env_id: "openshift" +public_dns_domain: "example.com" +public_dns_nameservers: [] + +# # Used Hostnames +# # - set custom hostnames for roles by uncommenting corresponding lines +#openstack_master_hostname: "master" +#openstack_infra_hostname: "infra-node" +#openstack_node_hostname: "app-node" +#openstack_lb_hostname: "lb" +#openstack_etcd_hostname: "etcd" +#openstack_dns_hostname: "dns" + +openstack_ssh_public_key: "openshift" +openstack_external_network_name: "public" +#openstack_private_network_name: "openshift-ansible-{{ stack_name }}-net" +# # A dedicated Neutron network name for containers data network +# # Configures the data network to be separated from openstack_private_network_name +# # NOTE: this is only supported with Flannel SDN yet +#openstack_private_data_network_name: "openshift-ansible-{{ stack_name }}-data-net" + +## If you want to use a provider network, set its name here. +## NOTE: the `openstack_external_network_name` and +## `openstack_private_network_name` options will be ignored when using a +## provider network. +#openstack_provider_network_name: "provider" + +# # Used Images +# # - set specific images for roles by uncommenting corresponding lines +# # - note: do not remove openstack_default_image_name definition +#openstack_master_image_name: "centos7" +#openstack_infra_image_name: "centos7" +#openstack_node_image_name: "centos7" +#openstack_lb_image_name: "centos7" +#openstack_etcd_image_name: "centos7" +#openstack_dns_image_name: "centos7" +openstack_default_image_name: "centos7" + +openstack_num_masters: 1 +openstack_num_infra: 1 +openstack_num_nodes: 2 + +# # Used Flavors +# # - set specific flavors for roles by uncommenting corresponding lines +# # - note: do note remove openstack_default_flavor definition +#openstack_master_flavor: "m1.medium" +#openstack_infra_flavor: "m1.medium" +#openstack_node_flavor: "m1.medium" +#openstack_lb_flavor: "m1.medium" +#openstack_etcd_flavor: "m1.medium" +#openstack_dns_flavor: "m1.medium" +openstack_default_flavor: "m1.medium" + +# # Numerical index of nodes to remove +# openstack_nodes_to_remove: [] + +# # Docker volume size +# # - set specific volume size for roles by uncommenting corresponding lines +# # - note: do not remove docker_default_volume_size definition +#docker_master_volume_size: "15" +#docker_infra_volume_size: "15" +#docker_node_volume_size: "15" +#docker_etcd_volume_size: "2" +#docker_dns_volume_size: "1" +#docker_lb_volume_size: "5" +docker_volume_size: "15" + +## Specify server group policies for master and infra nodes. Nova must be configured to +## enable these policies. 'anti-affinity' will ensure that each VM is launched on a +## different physical host. +#openstack_master_server_group_policies: [anti-affinity] +#openstack_infra_server_group_policies: [anti-affinity] + +## Create a Cinder volume and use it for the OpenShift registry. +## NOTE: the openstack credentials and hosted registry options must be set in OSEv3.yml! +#cinder_hosted_registry_name: cinder-registry +#cinder_hosted_registry_size_gb: 10 + +## Set up a filesystem on the cinder volume specified in `OSEv3.yaml`. +## You need to specify the file system and volume ID in OSEv3 via +## `openshift_hosted_registry_storage_openstack_filesystem` and +## `openshift_hosted_registry_storage_openstack_volumeID`. +## WARNING: This will delete any data on the volume! +#prepare_and_format_registry_volume: False + +openstack_subnet_prefix: "192.168.99" + +## Red Hat subscription defaults to false which means we will not attempt to +## subscribe the nodes +#rhsm_register: False + +# # Using Red Hat Satellite: +#rhsm_register: True +#rhsm_satellite: 'sat-6.example.com' +#rhsm_org: 'OPENSHIFT_ORG' +#rhsm_activationkey: '' + +# # Or using RHN username, password and optionally pool: +#rhsm_register: True +#rhsm_username: '' +#rhsm_password: '' +#rhsm_pool: '' + +#rhsm_repos: +# - "rhel-7-server-rpms" +# - "rhel-7-server-ose-3.5-rpms" +# - "rhel-7-server-extras-rpms" +# - "rhel-7-fast-datapath-rpms" + + +# # Roll-your-own DNS +#openstack_num_dns: 0 +#external_nsupdate_keys: +# public: +# key_secret: 'SKqKNdpfk7llKxZ57bbxUnUDobaaJp9t8CjXLJPl+fRI5mPcSBuxTAyvJPa6Y9R7vUg9DwCy/6WTpgLNqnV4Hg==' +# key_algorithm: 'hmac-md5' +# server: '192.168.1.1' +# private: +# key_secret: 'kVE2bVTgZjrdJipxPhID8BEZmbHD8cExlVPR+zbFpW6la8kL5wpXiwOh8q5AAosXQI5t95UXwq3Inx8QT58duw==' +# key_algorithm: 'hmac-md5' +# server: '192.168.1.2' + +# # Customize DNS server security options +#named_public_recursion: 'no' +#named_private_recursion: 'yes' + + +# NOTE(shadower): Do not change this value. The Ansible user is currently +# hardcoded to `openshift`. +ansible_user: openshift + +# # Use a single security group for a cluster (default: false) +#openstack_flat_secgrp: false + +# # Openstack inventory type and cluster nodes access pattern +# # Defaults to 'static'. +# # Use 'dynamic' to access cluster nodes directly, via floating IPs +# # and given a dynamic inventory script, like openstack.py +#openstack_inventory: static +# # The path to checkpoint the static inventory from the in-memory one +#openstack_inventory_path: ../../../../inventory + +# # Use bastion node to access cluster nodes (Defaults to False). +# # Requires a static inventory. +#openstack_use_bastion: False +#bastion_ingress_cidr: "{{openstack_subnet_prefix}}.0/24" +# +# # The Nova key-pair's private SSH key to access inventory nodes +#openstack_private_ssh_key: ~/.ssh/openshift +# # The path for the SSH config to access all nodes +#openstack_ssh_config_path: /tmp/ssh.config.openshift.ansible.{{ env_id }}.{{ public_dns_domain }} + + +# If you want to use the VM storage instead of Cinder volumes, set this to `true`. +# NOTE: this is for testing only! Your data will be gone once the VM disappears! +# ephemeral_volumes: false + +# # OpenShift node labels +# # - in order to customise node labels for app and/or infra group, set the +# # openshift_cluster_node_labels variable +#openshift_cluster_node_labels: +# app: +# region: primary +# infra: +# region: infra diff --git a/playbooks/openstack/sample-inventory/inventory.py b/playbooks/openstack/sample-inventory/inventory.py new file mode 100755 index 000000000..6a1b74b3d --- /dev/null +++ b/playbooks/openstack/sample-inventory/inventory.py @@ -0,0 +1,88 @@ +#!/usr/bin/env python + +from __future__ import print_function + +import json + +import shade + + +if __name__ == '__main__': + cloud = shade.openstack_cloud() + + inventory = {} + + # TODO(shadower): filter the servers based on the `OPENSHIFT_CLUSTER` + # environment variable. + cluster_hosts = [ + server for server in cloud.list_servers() + if 'metadata' in server and 'clusterid' in server.metadata] + + masters = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'master'] + + etcd = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'etcd'] + if not etcd: + etcd = masters + + infra_hosts = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'node' and + server.metadata['sub-host-type'] == 'infra'] + + app = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'node' and + server.metadata['sub-host-type'] == 'app'] + + nodes = list(set(masters + infra_hosts + app)) + + dns = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'dns'] + + lb = [server.name for server in cluster_hosts + if server.metadata['host-type'] == 'lb'] + + osev3 = list(set(nodes + etcd + lb)) + + groups = [server.metadata.group for server in cluster_hosts + if 'group' in server.metadata] + + inventory['cluster_hosts'] = {'hosts': [s.name for s in cluster_hosts]} + inventory['OSEv3'] = {'hosts': osev3} + inventory['masters'] = {'hosts': masters} + inventory['etcd'] = {'hosts': etcd} + inventory['nodes'] = {'hosts': nodes} + inventory['infra_hosts'] = {'hosts': infra_hosts} + inventory['app'] = {'hosts': app} + inventory['dns'] = {'hosts': dns} + inventory['lb'] = {'hosts': lb} + + for server in cluster_hosts: + if 'group' in server.metadata: + group = server.metadata.group + if group not in inventory: + inventory[group] = {'hosts': []} + inventory[group]['hosts'].append(server.name) + + inventory['_meta'] = {'hostvars': {}} + + for server in cluster_hosts: + ssh_ip_address = server.public_v4 or server.private_v4 + vars = { + 'ansible_host': ssh_ip_address + } + + public_v4 = server.public_v4 or server.private_v4 + if public_v4: + vars['public_v4'] = public_v4 + # TODO(shadower): what about multiple networks? + if server.private_v4: + vars['private_v4'] = server.private_v4 + + node_labels = server.metadata.get('node_labels') + if node_labels: + vars['openshift_node_labels'] = node_labels + + inventory['_meta']['hostvars'][server.name] = vars + + print(json.dumps(inventory, indent=4, sort_keys=True)) -- cgit v1.2.1