summaryrefslogtreecommitdiffstats
path: root/setup/projects/kaas/files/etc/apache2/httpd.conf
diff options
context:
space:
mode:
Diffstat (limited to 'setup/projects/kaas/files/etc/apache2/httpd.conf')
-rw-r--r--setup/projects/kaas/files/etc/apache2/httpd.conf496
1 files changed, 496 insertions, 0 deletions
diff --git a/setup/projects/kaas/files/etc/apache2/httpd.conf b/setup/projects/kaas/files/etc/apache2/httpd.conf
new file mode 100644
index 0000000..4b05e71
--- /dev/null
+++ b/setup/projects/kaas/files/etc/apache2/httpd.conf
@@ -0,0 +1,496 @@
+#
+# This is the main Apache HTTP server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
+# In particular, see
+# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
+# with ServerRoot set to '/www' will be interpreted by the
+# server as '/www/log/access_log', where as '/log/access_log' will be
+# interpreted as '/log/access_log'.
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path. If you point
+# ServerRoot at a non-local disk, be sure to point the LockFile directive
+# at a local disk. If you wish to share the same ServerRoot for multiple
+# httpd daemons, you will need to change at least LockFile and PidFile.
+#
+ServerRoot "/usr/local/apache2"
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 8080
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+LoadModule authn_file_module modules/mod_authn_file.so
+LoadModule authn_dbm_module modules/mod_authn_dbm.so
+LoadModule authn_anon_module modules/mod_authn_anon.so
+LoadModule authn_dbd_module modules/mod_authn_dbd.so
+LoadModule authn_default_module modules/mod_authn_default.so
+LoadModule authn_alias_module modules/mod_authn_alias.so
+LoadModule authz_host_module modules/mod_authz_host.so
+LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+LoadModule authz_user_module modules/mod_authz_user.so
+LoadModule authz_dbm_module modules/mod_authz_dbm.so
+LoadModule authz_owner_module modules/mod_authz_owner.so
+LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
+LoadModule authz_default_module modules/mod_authz_default.so
+LoadModule auth_basic_module modules/mod_auth_basic.so
+LoadModule auth_digest_module modules/mod_auth_digest.so
+LoadModule file_cache_module modules/mod_file_cache.so
+LoadModule cache_module modules/mod_cache.so
+LoadModule disk_cache_module modules/mod_disk_cache.so
+LoadModule mem_cache_module modules/mod_mem_cache.so
+LoadModule dbd_module modules/mod_dbd.so
+LoadModule dumpio_module modules/mod_dumpio.so
+LoadModule reqtimeout_module modules/mod_reqtimeout.so
+LoadModule ext_filter_module modules/mod_ext_filter.so
+LoadModule include_module modules/mod_include.so
+LoadModule filter_module modules/mod_filter.so
+LoadModule substitute_module modules/mod_substitute.so
+LoadModule charset_lite_module modules/mod_charset_lite.so
+LoadModule deflate_module modules/mod_deflate.so
+LoadModule ldap_module modules/mod_ldap.so
+LoadModule log_config_module modules/mod_log_config.so
+LoadModule log_forensic_module modules/mod_log_forensic.so
+LoadModule logio_module modules/mod_logio.so
+LoadModule env_module modules/mod_env.so
+LoadModule mime_magic_module modules/mod_mime_magic.so
+LoadModule cern_meta_module modules/mod_cern_meta.so
+LoadModule expires_module modules/mod_expires.so
+LoadModule headers_module modules/mod_headers.so
+LoadModule ident_module modules/mod_ident.so
+LoadModule usertrack_module modules/mod_usertrack.so
+LoadModule unique_id_module modules/mod_unique_id.so
+LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule version_module modules/mod_version.so
+LoadModule proxy_module modules/mod_proxy.so
+LoadModule proxy_connect_module modules/mod_proxy_connect.so
+LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+LoadModule proxy_http_module modules/mod_proxy_http.so
+LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
+LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
+LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+LoadModule ssl_module modules/mod_ssl.so
+LoadModule mime_module modules/mod_mime.so
+LoadModule dav_module modules/mod_dav.so
+LoadModule status_module modules/mod_status.so
+LoadModule autoindex_module modules/mod_autoindex.so
+LoadModule asis_module modules/mod_asis.so
+LoadModule info_module modules/mod_info.so
+LoadModule cgi_module modules/mod_cgi.so
+LoadModule dav_fs_module modules/mod_dav_fs.so
+LoadModule dav_lock_module modules/mod_dav_lock.so
+LoadModule vhost_alias_module modules/mod_vhost_alias.so
+LoadModule negotiation_module modules/mod_negotiation.so
+LoadModule dir_module modules/mod_dir.so
+LoadModule imagemap_module modules/mod_imagemap.so
+LoadModule actions_module modules/mod_actions.so
+LoadModule speling_module modules/mod_speling.so
+LoadModule userdir_module modules/mod_userdir.so
+LoadModule alias_module modules/mod_alias.so
+LoadModule rewrite_module modules/mod_rewrite.so
+
+<IfModule !mpm_netware_module>
+<IfModule !mpm_winnt_module>
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# It is usually good practice to create a dedicated user and group for
+# running httpd, as with most system services.
+#
+User daemon
+Group daemon
+
+</IfModule>
+</IfModule>
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition. These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+#
+ServerAdmin you@example.com
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+#ServerName www.example.com:80
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/usr/local/apache2/htdocs"
+
+#
+# Each directory to which Apache has access can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories).
+#
+# First, we configure the "default" to be a very restrictive set of
+# features.
+#
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Order deny,allow
+ Deny from all
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/usr/local/apache2/htdocs">
+ #
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs/2.2/mod/core.html#options
+ # for more information.
+ #
+ Options Indexes FollowSymLinks
+
+ #
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # Options FileInfo AuthConfig Limit
+ #
+ AllowOverride None
+
+ #
+ # Controls who can get stuff from this server.
+ #
+ Order allow,deny
+ Allow from all
+
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+ DirectoryIndex index.html
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<FilesMatch "^\.ht">
+ Order allow,deny
+ Deny from all
+ Satisfy All
+</FilesMatch>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog /proc/self/fd/2
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+<IfModule log_config_module>
+ #
+ # The following directives define some format nicknames for use with
+ # a CustomLog directive (see below).
+ #
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+ LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+ <IfModule logio_module>
+ # You need to enable mod_logio.c to use %I and %O
+ LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+ </IfModule>
+
+ #
+ # The location and format of the access logfile (Common Logfile Format).
+ # If you do not define any access logfiles within a <VirtualHost>
+ # container, they will be logged here. Contrariwise, if you *do*
+ # define per-<VirtualHost> access logfiles, transactions will be
+ # logged therein and *not* in this file.
+ #
+ CustomLog /proc/self/fd/1 common
+
+ #
+ # If you prefer a logfile with access, agent, and referer information
+ # (Combined Logfile Format) you can use the following directive.
+ #
+ #CustomLog "logs/access_log" combined
+</IfModule>
+
+<IfModule alias_module>
+ #
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ #
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ #
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ #
+ ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
+
+</IfModule>
+
+<IfModule cgid_module>
+ #
+ # ScriptSock: On threaded servers, designate the path to the UNIX
+ # socket used to communicate with the CGI daemon of mod_cgid.
+ #
+ #Scriptsock logs/cgisock
+</IfModule>
+
+#
+# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/usr/local/apache2/cgi-bin">
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# DefaultType: the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+<IfModule headers_module>
+ #
+ # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
+ # backend servers which have lingering "httpoxy" defects.
+ # 'Proxy' request header is undefined by the IETF, not listed by IANA
+ #
+ RequestHeader unset Proxy early
+</IfModule>
+
+<IfModule mime_module>
+ #
+ # TypesConfig points to the file containing the list of mappings from
+ # filename extension to MIME-type.
+ #
+ TypesConfig conf/mime.types
+
+ #
+ # AddType allows you to add to or override the MIME configuration
+ # file specified in TypesConfig for specific file types.
+ #
+ #AddType application/x-gzip .tgz
+ #
+ # AddEncoding allows you to have certain browsers uncompress
+ # information on the fly. Note: Not all browsers support this.
+ #
+ #AddEncoding x-compress .Z
+ #AddEncoding x-gzip .gz .tgz
+ #
+ # If the AddEncoding directives above are commented-out, then you
+ # probably should define those extensions to indicate media types:
+ #
+ AddType application/x-compress .Z
+ AddType application/x-gzip .gz .tgz
+
+ #
+ # AddHandler allows you to map certain file extensions to "handlers":
+ # actions unrelated to filetype. These can be either built into the server
+ # or added with the Action directive (see below)
+ #
+ # To use CGI scripts outside of ScriptAliased directories:
+ # (You will also need to add "ExecCGI" to the "Options" directive.)
+ #
+ #AddHandler cgi-script .cgi
+
+ # For type maps (negotiated resources):
+ #AddHandler type-map var
+
+ #
+ # Filters allow you to process content before it is sent to the client.
+ #
+ # To parse .shtml files for server-side includes (SSI):
+ # (You will also need to add "Includes" to the "Options" directive.)
+ #
+ #AddType text/html .shtml
+ #AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+#MIMEMagicFile conf/magic
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# MaxRanges: Maximum number of Ranges in a request before
+# returning the entire resource, or one of the special
+# values 'default', 'none' or 'unlimited'.
+# Default setting is to accept 200 Ranges.
+#MaxRanges unlimited
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+#
+#EnableMMAP off
+#EnableSendfile off
+
+# Supplemental configuration
+#
+# The configuration files in the conf/extra/ directory can be
+# included to add extra features or to modify the default configuration of
+# the server, or you may simply copy their contents here and change as
+# necessary.
+
+# Server-pool management (MPM specific)
+#Include conf/extra/httpd-mpm.conf
+
+# Multi-language error messages
+#Include conf/extra/httpd-multilang-errordoc.conf
+
+# Fancy directory listings
+#Include conf/extra/httpd-autoindex.conf
+
+# Language settings
+#Include conf/extra/httpd-languages.conf
+
+# User home directories
+#Include conf/extra/httpd-userdir.conf
+
+# Real-time info on requests and configuration
+#Include conf/extra/httpd-info.conf
+
+# Virtual hosts
+#Include conf/extra/httpd-vhosts.conf
+
+# Local access to the Apache HTTP Server Manual
+#Include conf/extra/httpd-manual.conf
+
+# Distributed authoring and versioning (WebDAV)
+#Include conf/extra/httpd-dav.conf
+
+# Various default settings
+#Include conf/extra/httpd-default.conf
+
+# Secure (SSL/TLS) connections
+#Include conf/extra/httpd-ssl.conf
+#
+# Note: The following must must be present to support
+# starting without SSL on platforms with no /dev/random equivalent
+# but a statically compiled-in mod_ssl.
+#
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
+
+Include conf/kaas/router.conf