diff options
Diffstat (limited to 'setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf')
| -rw-r--r-- | setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf | 494 |
1 files changed, 0 insertions, 494 deletions
diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf deleted file mode 100644 index 8724924..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf +++ /dev/null @@ -1,494 +0,0 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See <URL:http://httpd.apache.org/docs/2.2> for detailed information. -# In particular, see -# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so 'log/access_log' -# with ServerRoot set to '/www' will be interpreted by the -# server as '/www/log/access_log', where as '/log/access_log' will be -# interpreted as '/log/access_log'. - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to point the LockFile directive -# at a local disk. If you wish to share the same ServerRoot for multiple -# httpd daemons, you will need to change at least LockFile and PidFile. -# -ServerRoot "/usr/local/apache2" - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the <VirtualHost> -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 8080 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -LoadModule authn_file_module modules/mod_authn_file.so -LoadModule authn_dbm_module modules/mod_authn_dbm.so -LoadModule authn_anon_module modules/mod_authn_anon.so -LoadModule authn_dbd_module modules/mod_authn_dbd.so -LoadModule authn_default_module modules/mod_authn_default.so -LoadModule authn_alias_module modules/mod_authn_alias.so -LoadModule authz_host_module modules/mod_authz_host.so -LoadModule authz_groupfile_module modules/mod_authz_groupfile.so -LoadModule authz_user_module modules/mod_authz_user.so -LoadModule authz_dbm_module modules/mod_authz_dbm.so -LoadModule authz_owner_module modules/mod_authz_owner.so -LoadModule authnz_ldap_module modules/mod_authnz_ldap.so -LoadModule authz_default_module modules/mod_authz_default.so -LoadModule auth_basic_module modules/mod_auth_basic.so -LoadModule auth_digest_module modules/mod_auth_digest.so -LoadModule file_cache_module modules/mod_file_cache.so -LoadModule cache_module modules/mod_cache.so -LoadModule disk_cache_module modules/mod_disk_cache.so -LoadModule mem_cache_module modules/mod_mem_cache.so -LoadModule dbd_module modules/mod_dbd.so -LoadModule dumpio_module modules/mod_dumpio.so -LoadModule reqtimeout_module modules/mod_reqtimeout.so -LoadModule ext_filter_module modules/mod_ext_filter.so -LoadModule include_module modules/mod_include.so -LoadModule filter_module modules/mod_filter.so -LoadModule substitute_module modules/mod_substitute.so -LoadModule charset_lite_module modules/mod_charset_lite.so -LoadModule deflate_module modules/mod_deflate.so -LoadModule ldap_module modules/mod_ldap.so -LoadModule log_config_module modules/mod_log_config.so -LoadModule log_forensic_module modules/mod_log_forensic.so -LoadModule logio_module modules/mod_logio.so -LoadModule env_module modules/mod_env.so -LoadModule mime_magic_module modules/mod_mime_magic.so -LoadModule cern_meta_module modules/mod_cern_meta.so -LoadModule expires_module modules/mod_expires.so -LoadModule headers_module modules/mod_headers.so -LoadModule ident_module modules/mod_ident.so -LoadModule usertrack_module modules/mod_usertrack.so -LoadModule unique_id_module modules/mod_unique_id.so -LoadModule setenvif_module modules/mod_setenvif.so -LoadModule version_module modules/mod_version.so -LoadModule proxy_module modules/mod_proxy.so -LoadModule proxy_connect_module modules/mod_proxy_connect.so -LoadModule proxy_ftp_module modules/mod_proxy_ftp.so -LoadModule proxy_http_module modules/mod_proxy_http.so -LoadModule proxy_scgi_module modules/mod_proxy_scgi.so -LoadModule proxy_ajp_module modules/mod_proxy_ajp.so -LoadModule proxy_balancer_module modules/mod_proxy_balancer.so -LoadModule ssl_module modules/mod_ssl.so -LoadModule mime_module modules/mod_mime.so -LoadModule dav_module modules/mod_dav.so -LoadModule status_module modules/mod_status.so -LoadModule autoindex_module modules/mod_autoindex.so -LoadModule asis_module modules/mod_asis.so -LoadModule info_module modules/mod_info.so -LoadModule cgi_module modules/mod_cgi.so -LoadModule dav_fs_module modules/mod_dav_fs.so -LoadModule dav_lock_module modules/mod_dav_lock.so -LoadModule vhost_alias_module modules/mod_vhost_alias.so -LoadModule negotiation_module modules/mod_negotiation.so -LoadModule dir_module modules/mod_dir.so -LoadModule imagemap_module modules/mod_imagemap.so -LoadModule actions_module modules/mod_actions.so -LoadModule speling_module modules/mod_speling.so -LoadModule userdir_module modules/mod_userdir.so -LoadModule alias_module modules/mod_alias.so -LoadModule rewrite_module modules/mod_rewrite.so - -<IfModule !mpm_netware_module> -<IfModule !mpm_winnt_module> -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User daemon -Group daemon - -</IfModule> -</IfModule> - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# <VirtualHost> definition. These values also provide defaults for -# any <VirtualHost> containers you may define later in the file. -# -# All of these directives may appear inside <VirtualHost> containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin you@example.com - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -#ServerName www.example.com:80 - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/usr/local/apache2/htdocs" - -# -# Each directory to which Apache has access can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# features. -# -<Directory /> - Options FollowSymLinks - AllowOverride None - Order deny,allow - Deny from all -</Directory> - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# -<Directory "/usr/local/apache2/htdocs"> - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.2/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # Options FileInfo AuthConfig Limit - # - AllowOverride None - - # - # Controls who can get stuff from this server. - # - Order allow,deny - Allow from all - -</Directory> - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# -<IfModule dir_module> - DirectoryIndex index.html -</IfModule> - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# -<FilesMatch "^\.ht"> - Order allow,deny - Deny from all - Satisfy All -</FilesMatch> - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog "logs/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -<IfModule log_config_module> - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - <IfModule logio_module> - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - </IfModule> - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a <VirtualHost> - # container, they will be logged here. Contrariwise, if you *do* - # define per-<VirtualHost> access logfiles, transactions will be - # logged therein and *not* in this file. - # - CustomLog "logs/access_log" common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - #CustomLog "logs/access_log" combined -</IfModule> - -<IfModule alias_module> - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a <Directory> section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" - -</IfModule> - -<IfModule cgid_module> - # - # ScriptSock: On threaded servers, designate the path to the UNIX - # socket used to communicate with the CGI daemon of mod_cgid. - # - #Scriptsock logs/cgisock -</IfModule> - -# -# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# -<Directory "/usr/local/apache2/cgi-bin"> - AllowOverride None - Options None - Order allow,deny - Allow from all -</Directory> - -# -# DefaultType: the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -<IfModule headers_module> - # - # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied - # backend servers which have lingering "httpoxy" defects. - # 'Proxy' request header is undefined by the IETF, not listed by IANA - # - RequestHeader unset Proxy early -</IfModule> - -<IfModule mime_module> - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig conf/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - #AddType text/html .shtml - #AddOutputFilter INCLUDES .shtml -</IfModule> - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# -#MIMEMagicFile conf/magic - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# MaxRanges: Maximum number of Ranges in a request before -# returning the entire resource, or one of the special -# values 'default', 'none' or 'unlimited'. -# Default setting is to accept 200 Ranges. -#MaxRanges unlimited - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall is used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# -#EnableMMAP off -#EnableSendfile off - -# Supplemental configuration -# -# The configuration files in the conf/extra/ directory can be -# included to add extra features or to modify the default configuration of -# the server, or you may simply copy their contents here and change as -# necessary. - -# Server-pool management (MPM specific) -#Include conf/extra/httpd-mpm.conf - -# Multi-language error messages -#Include conf/extra/httpd-multilang-errordoc.conf - -# Fancy directory listings -#Include conf/extra/httpd-autoindex.conf - -# Language settings -#Include conf/extra/httpd-languages.conf - -# User home directories -#Include conf/extra/httpd-userdir.conf - -# Real-time info on requests and configuration -#Include conf/extra/httpd-info.conf - -# Virtual hosts -#Include conf/extra/httpd-vhosts.conf - -# Local access to the Apache HTTP Server Manual -#Include conf/extra/httpd-manual.conf - -# Distributed authoring and versioning (WebDAV) -#Include conf/extra/httpd-dav.conf - -# Various default settings -#Include conf/extra/httpd-default.conf - -# Secure (SSL/TLS) connections -#Include conf/extra/httpd-ssl.conf -# -# Note: The following must must be present to support -# starting without SSL on platforms with no /dev/random equivalent -# but a statically compiled-in mod_ssl. -# -<IfModule ssl_module> -SSLRandomSeed startup builtin -SSLRandomSeed connect builtin -</IfModule> |